DJI Zenmuse H3-3D 3-Axis Gimbal for GoPro HERO3/HERO3+ for Phantom 2
The
Zenmuse H3-3D 3-Axis Gimbal for GoPro HERO3/HERO3+ for Phantom 2 from
DJI is a camera stabilization device that is exclusively for the DJI Phantom 2 Quadcopter. It is driven by a 3-axis brushless gimbal that not only supports tilting and canting, like the previous H3-2D model, but also panning as well. Not only will it keep your aerial video's horizon level and isolated from vibration, the gimbal can also be used to remotely operate there camera, allowing you to adjust the camera angle with ±0.08° accuracy in flight.
Electronically, the gimbal is designed to operate plug and play with the Phantom 2; however you may or may not require additional mounting hardware depending on which version of Phantom 2 you have. The first version of the Phantom 2 (v1) has a small opening on the bottom of the airframe that was optimized for the H3-2D gimbal, and is too small for the H3-3D. In this case, additional mounting hardware is required to act as a spacer, and taller landing gear will also need to be installed. Theses parts are all included in CP.PT.000107, which is sold separately. If you are using the later Phantom 2 (v2 or later), then no additional mounting hardware is required, and the original landing gear can still be used. If you are using a different aircraft than the Phantom 2 (that still has a compatible DJI flight control system) you will need the "hobbyist" version of the H3-3D, which includes a GCU (gimbal control unit) and other essential hardware. No version of the H3-3D version is compatible with the Phantom 1.
Note: This system is for the naked, unmodified GoPro HERO3 or HERO3+ action cameras only. Camera add-ons such as filters or housings will throw off the balance and could damage the gimbal.
Controlled Angle Accuracy | Tilt/Roll: ±0.02° Yaw: ±0.03° |
Maximum Controlled Rotation Speed | Tilt Axis: ±130°/s |
Controlled Rotation Range | Tilt Axis Control: -130 to +45° |
Supported Flight Control Systems | DJI Phantom 2 |
Operating Current Consumption | Static Current: 400 mA at 12 V Dynamic Current: 600 mA at 12 V |
Power Requirements | 3S to 6S LiPo (12 to 26 VDC) |
System Requirements | For Assistant Software: Windows 8, 7, Vista, or XP SP3 |
Operating Temperature | 50 to 122°F / 10 to 50°C |
Dimensions | 3.8 x 3.7 x 2.89" / 97 x 95 x 73 mm |
Weight | 5.9 oz / 168 g -- without camera |
DJI Zenmuse H3-3D 3-Axis Gimbal for GoPro HERO3/HERO3+ for Phantom 2
- Damping Unit
- 4 x Spare Vibration Absorbers
- 4 x Securing Kits
- Camera Securing Bracket
- 8 - Pin Cable
- Anti-Interference Board
Loading ...
Login to get access to Q&A
Reviews DJI Zenmuse H3-3D 3-Axis Gimbal for GoPro HERO3/HERO3+ for Phantom 2