YongNuo RF-605N (1 Pair) Wireless Flash Trigger for Nikon DSLR Cameras (Compatible with RF-602 and RF-603 II)
Improved Features
Shutter release function
- RF-602 mode, supports wireless shutter release, the transmitter set to " TX " mode, the receiver set to " RX " mode.
- RF-603 mode, supports wired / wireless shutter released, all transceivers set to " TRX " mode. In this mode, you can use RF-605 single transceiver as wired shutter release function.
Flash Trigger function
- Set the communication mode: Set all the transmitters and receivers to the same communication mode
- Set the transmit-receiver status": Set the transmitter to TX, the receiver sete to RX or TRX.
You can use shutter release function and flash trigger function simultaneously.
You can use it with Studio Strobe Light with the 6.35mm Sync Cable.
- Higher Sync Speeds, up to 1/320th (RF-602 were slow, RF-603 were very slow)
- Locking Rings on trigger foot (RF-603 and flash on top would fall off the camera)
- Pass Through Hotshoe now usable (see point above) though still manual only no TTL
- Power Switch Finally Moved to the Side (was blocked by the flash on 602 & 603)
- Compatible with non Canon/Nikon and single firing pin cameras (RF-603 was not)
- Test Fire Button works off the camera hotshoe (for taking light meter readings) (RF-603 did not)
- 300v Safe Trigger Voltage (for hotshoe and PC sync port) (602/603 where low 12 volt safe limit)
- Higher Sync Speeds, up to 1/320th (RF-602 were slow, RF-603 were very slow)
- Locking Rings on trigger foot (RF-603 and flash on top would fall off the camera)
- Pass Through Hotshoe now usable (see point above) though still manual only no TTL
- Power Switch Finally Moved to the Side (was blocked by the flash on 602 & 603)
- Compatible with non Canon/Nikon and single firing pin cameras (RF-603 was not)
- Test Fire Button works off the camera hotshoe (for taking light meter readings) (RF-603 did not)
- 300v Safe Trigger Voltage (for hotshoe and PC sync port) (602/603 where low 12 volt safe limit)
- it has two communication modes RF-602 and RF-603, so you can use RF-605, RF-603 II, RF-602 together. ( but you can't use them in group function together )
- it has TX (single transmit) / RX ( single receiver ) / TRX (transmit-receive automatic switch), so you can not only use it as transmitter but also as receiver.
- it has A/B/C/D/E/F 6 groups ( compatible with YN560-TX )
- it has wireless shutter remote control, wireless Flash trigger function.
- it has Clear LCD screen, shortcut key operation
- it has 16 channels ( FSK 2.4GHz wireless channel )
Compatible With -
Flash Trigger
- Yongnuo RF-602 N
- RF-603 N1 / N3
- RF-603 II N1 / N3
- YN560-TX N
Cameras
- Nikon D4S Df D4 D3X D810 D800 D800E D610 D600 D300s D7200 D7100 D7000 D90 D5300 D5200 D5100 D5000 D3300 D3200 D3100 D3000
Suit for Flash Speedlite with " Sleep mode" function:
- Nikon
- Canon
- Olympus
- Pentax
- Samsung
- Yongnuo YN-560 IV YN-560 III YN-560 II YN-460 II YN-460 in manual mode
- Yongnuo YN-565EX, YN-568EX II in manual mode
- Type: FSK 2.4GHz wireless remote control system
- Transmission distance: 100m
- Channels:16 channels
- Group:6 Groups
- Shutter release: half-press, full-press
- Shutter interface: 2.5mm socket
- Studio flash light interface: standard PC socket
- Max Sync Speed: 1/320 second
- Battery: AAA×2(3V )
- Size : 85MM x 41MM x 35MM
Loading ...Shipping Rate & Duration
Lost / Damaged Parcel? We Guarantee Safe Arrival!
100% Under ShaShinKi Responsibilty! Full Refund or New Replacement!
Similar products
Your Recently Viewed Items
Reviews YongNuo RF-605N (1 Pair) Wireless Flash Trigger for Nikon DSLR Cameras (Compatible with RF-602 and RF-603 II)