1). Suitable for de-soldering and soldering BGA, SOIC, CHIP, QFP, PLCC package SMD IC,
Particularly suitable for de-soldering BGA module, computer motherboard north and south bridge,
all kinds of mobile phone motherboard SMT IC and LED lights.
2). Shrinking, Paint drying, adhesive removal, thawing, warming, Plastic welding etc.
Using microcomputer processor PID programmable temperature control technology
1.Preheating station is to use a glaze layerhaving a high thermal effect, good thermal shock
resistance of the ceramic as the substrate, high-quality nickel branded alloy wire once sintering.
It has a high thermal effect, overall good, good thermal stability, uniform heating, high dielectric
strength, clean, easy to install and so on features.
2.Air Gun heater use ceramic heaterheating elements firmly wrapped around the model ceramic,
rapidly and uniform heating. Use the upgraded version fan, the airflow larger than the ordinary fan,
spiral out of the wind, long life.
3.The machine has a self-test functionfull intelligent over-temperature, short-circuit, open circuit,
overload and fault display and protection functions.
4.Preheating station using the user-friendly designthe cover affixed with a
high-temperature, insulated protection pads to prevent scalding operation. The stent uses
magnetic induction technology, card board bracket to prevent protective pads suck hood above,
can rotate 360 degrees, flexible card board, it is suitable for thedifferent shapes and sizescircuit boards.
5.Temperature correction functionto adapt to the environmental impact, or replace the
heating elements, soldering iron tips etc. spare parts caused by temperature deviation, can use
this function calibration temperature. The correction temperature range is -50°C~ +50 °C
6.Celsius / Fahrenheit temperature display functionmeet different market needs
to design the temperature display mode, you can choose under customary interest.
|Max power consumption||
Preheating Station Parts
|Temperature Range||50~ 300 °c or 50~400 °c /152~572 °F or 152~752 °F|
|Temperature Stability||±2 °c|
Hot Air Reworks Parts
|Airflow type||brushless fan spiral out wind|
|Temperature Range||100 °c -480 °c /212°F ~896 °F|
|Temperature Stability||100 °c -480 °c /212 °F ~896 °F|
|Handle cable length||≥100cm|
|QTY 4PCS||Outer carton|
|Inner box size||37*35*18cm|
|Outer carton box size||73*40*39cm|
GB YIHUA 853AA High Power ESD BGA Rework Station PCB Preheat & Desoldering IR Preheating Station