Yamaha Tio1608-D Dante-Equipped I/O Rack
Yamaha Tio1608-D Dante-Equipped I/O Rack

Yamaha Tio1608-D Dante-Equipped I/O Rack

yamaha

SSK # YAM-TIO1608-D

Estimated 3-14 Days from Supplier
Ship to:
6 Months ShaShinKi Warranty
RM8,550.00

Shopping Point 42.750 = RM42.75

Key Features

  • Works Remotely with TF Series Consoles
  • 1x Cable Connection to Console via Dante
  • Preamp with Balanced Inputs & Outputs
  • 16x Combo XLR/TRS Input Jacks
  • 8x XLR Output Jacks
  • Supports 48V Phantom Power
  • 2x CAT5e LAN Ports (Primary & Secondary)
  • Quick Config Automates TF-Series Setup
  • DIP Switches Determine Startup Mode
  • Daisy Chain up to 48x Inputs / 24x Outs

Designed to work remotely with Yamaha TF-series consoles, the Tio1608-D is a preamp, I/O rack, and stage box. It uses Dante protocol to transmit multiple channels of audio from the stage to the console over one solitary ethernet cable.

In the purely analog realm, this operation would require a rat's nest of cables or a cumbersome snake; the Tio1608-D's Dante capabilities eliminate the cable clutter. It accomplishes this feat with a low-latency, high-quality transfer of analog signal to digital information—in this case at a sample rate of either 44.1 kHz or 48 kHz, and at a resolution of 24-bit or 32-bit.

This particular stage box provides 16x input channels and 8x output channels for communication via Dante to TF-series consoles; however, you can daisy chain up to three Tio1608-D's simultaneously, resulting in a stage box system of 48x inputs and 24x outputs with one to three cables running to the console, depending on how you rig it.

Front-Panel Overview

The preamp itself sports 16x combo XLR/TRS jacks (all supporting 48V phantom power) and 8x XLR output jacks. A Quick Config switch allows you to interface automatically with TF-series consoles.

Rear-Panel Overview

At the rear of the unit, a fan switch allows you to change the speed of the internal cooling system, while a series of DIP switches determine the unit's startup mode. You'll also notice only two CAT5e connection points: Primary, which is for direct connection to your Dante-enabled console, and Secondary, which is utilized for daisy chaining scenarios.

Power

AC Input Power 100 to 240 VAC, 50 / 60 Hz
Power Consumption 50 W

Environmental

Operating Temperature 32 to 104°F / 0 to 40°C
Storage Temperature -4 to 140°F / -20 to 60°C

Physical

Cable Length 7.9' / 2.4 m
Dimensions 18.9 x 14.3 x 3.5" / 48 x 36.3 x 8.9 cm
Weight 12.6 lb / 5.7 kg
  • Yamaha Tio1608-D Dante-Equipped I/O Rack

Reviews Yamaha Tio1608-D Dante-Equipped I/O Rack

Login to leave review.
Login to get access to Q&A

Yamaha Tio1608-D Dante-Equipped I/O Rack
Estimated 3-14 Days from Supplier
Yamaha Tio1608-D Dante-Equipped I/O Rack
0

RM8,550.00

Buy