Designed for recording and mixing in your home studio, the Yamaha HS8 Powered Studio Monitors with Stands and Isolation Pads Kit from B&H includes a pair of HS8 8" 120W powered speakers, a pair of Auray TMS-135 studio monitor floor stands, and a pair of Auray IP-M isolation pads.
This monitoring system is engineered to give you honest and precise audio reference with a concise sound image and flat frequency response. This helps ensure that your mix faithfully translates in most listening environments.
The HS8 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction. It is capable of up to 120W of total output and features an 8-inch woofer and a 1-inch tweeter with waveguide that can produce frequencies up to 30kHz. The HS8 has both an XLR and 1/4" TRS input that accept either balanced or unbalanced signals for integration into a variety of studio setups.
The TMS-135 Studio Monitor Stands from Auray are durably constructed and designed to support studio monitors at the optimal listening position in professional and home recording studios. Each stand is constructed from steel tubing and a 9" square steel plate. An ergonomic locking knob secures each stand, while a locking pin is inserted into six predrilled holes to allow the height of each monitor to be precisely adjusted in 3" increments between 36 and 54". Additionally, each steel plate features foam strips to keep your monitors securely in place, while reducing unwanted vibrations.
The triangular base provides a 17" spread for stability, while easily fitting into tight spaces near walls, behind desks, or in corners. They come with interchangeable rubber feet for hardwood floors as well as metal spike feet for carpeted floors. The necessary tools and hardware for assembling the stands and changing the feet from rubber pads to metal spikes and vice versa are included. Four cable guides are included on the central supports for neatly securing cables to the stand.
The large IP-L Isolation Pad from Auray is a monitor speaker isolation pad made from high-density acoustic foam. It is designed to decouple your monitor speakers from its resting surface by absorbing the monitor's vibrations. This stops reverberation through the desk or speaker stands, therefore preventing unwanted resonance. Removing these unwelcome vibrations results in greater depth of field, tighter low end and transient response, and a higher level of detail across the frequency spectrum.
|System Type||2-Way Bi-Amped Powered Studio Monitor|
|Frequency Response||38 Hz to 30 kHz|
|Crossover Frequency||2 kHz|
|Transducer||LF: 8" (127 mm) Cone
HF: 1" (25 mm) Dome
|Output Power||Total: 120W
|Input Sensitivity||-10 dBu / 10 kΩ|
|Inputs||1x Balanced XLR3-31 Type
1x 1/4" (6.35 mm) Balanced TRS
|Controls||Level Control (+4 dB/Center Click)
EQ: High Trim Switch (+/- 2 dB @ HF)
Room Control Switch(0, -2, -4 dB under 500 Hz)
|Indicators||1x Power On White LED|
|Power Consumption||60 W|
|Dimensions (WxHxD)||9.8 x 15.4 x 13.1" (250 x 390 x 334 mm)|
|Weight||22.5 lb (10.2 kg)|
|Package Weight||28.8 lb|
|Box Dimensions (LxWxH)||21 x 16.2 x 14.3"|
|Minimum Height||36" / 91 cm|
|Maximum Height||54" / 137 cm|
|Load Capacity||90 lb / 41 kg|
|Plate Size||9 x 9" / 23 x 23 cm|
|Base Spread||17" / 43.2 cm|
|Weight||8.4 lb / 3.8 kg|
|Package Weight||20.6 lb|
|Box Dimensions (LxWxH)||34.6 x 19.3 x 2.7"|
|Surface Area||12.75 x 11" (32.4 x 27.94 cm)|
|Dimensions||12.75 x 12.75" (32.4 x 32.4 cm)|
|Package Weight||0.55 lb|
|Box Dimensions (LxWxH)||13 x 13 x 2.2"|