An affordable solution to keep your gears always dry. No matter where you are!
(Dehumidifier, padded form and strap Included)
This re-chargeable moisture absorber is designed to absorb moisture in a closed container or dry box. It can be simply re-charged and re-used again.
Power Consumption : 16W AC110V-240V Moisture Indicator : Blue = Dry ; Pink = Wet
Step 1: Insert the power cable to the Absorber and connect the power cable to main AC power point. Red LED indicator will light up while charging. It will take about 2-3 hours to charge and dry up the silica gels.
Step2: Once the silica gels changed from pink to blue colour, Unplug the power cable and let it rest for about 10-15 minutes to cool down.
Step 3: Place the Absorber into the dry box or container to absorb the moisture. Do not connect the Absorber to power point while using the unit.
Step 4: (In the future) Repeat step 1 & 2 to re-charge the Absorber once the silicate beads become pink colour.
Step 5: Put the absorber into your dry box with your camera gear. Monitor for humidity between 45-55% and redry as necessary to maintain the humidity
External dimensions: 380 x W280 x H270 mm
* This product is not water resistant. Please keep it away from rain or wet areas.
* Do not place the Absorber in a closed container while charging as the unit will heat up.
* Only charge the Absorber in a well ventilated environment.
* Do not charge the absorber over 3 hours or overnight to avoid overheating the unit