DJI Transmitter v3.0 Remote Controller for Phantom 2 Vision+ Quadcopter (5.8GHz, Built-In 2000mAh Battery) (Official DJI Malaysia Warranty)
DJI Transmitter v3.0 Remote Controller for Phantom 2 Vision+ Quadcopter (5.8GHz, Built-In 2000mAh Battery) (Official DJI Malaysia Warranty)

DJI Transmitter v3.0 Remote Controller for Phantom 2 Vision+ Quadcopter (5.8GHz, Built-In 2000mAh Battery) (Official DJI Malaysia Warranty)

dji

SSK # DJI-PG-VS-CPPT000131

Estimated 3-14 Days Delivery
1 Year DJI Malaysia Warranty
RM565.00

Shopping Point 2.825 = RM2.83

Key Features

  • Uses 5.8 GHz ISM Frequency
  • Communication Range up to 2625'
  • Built-In 2000 mAh Battery
  • Left Dial for to Control Gimbal Tilt
  • USB Charging Cable Included
  • LED Battery Level Indicators
  • Trainer Report for Flight Simulation
  • Use as a Spare or Replacement Controller
  • Requires Pre-Flight Binding
  • For Phantom 2 Vision+/5.8 GHz Phantom 2

The Transmitter v3.0 for Phantom 2 Vision+ Quadcopter from DJI is a hand-held radio controller that uses a 5.8 GHz frequency and supports a communication distance of up to 2625', depending on the flight environment. Improvements to this second generation controller include a built-in LiPo battery with USB charging, a left dial for gimbal operation, and a trainer port. The transmitter uses a frequency hopping, anti-interference design to allow multiple transmitters to be active in the same area at the same time. You can use it as a spare or as a replacement for the transmitter that comes with your Phantom 2 Vision+ Quadcopter. The transmitter must be bound with your aircraft's receiver for use. Please consult your User Guide for binding instructions.

Note: This is the Phantom 2 Vision+ or the Phantom 2 with 5.8 GHz conversion only. The regular 2.4 GHz Phantom 2 requires a 2.4 GHz transmitter instead.

Trainer port for connecting the transmitter to a computer to use flight simulation software
Throttle Lock: Pull down the throttle stick to descend. The stick will lock into place and the aircraft will descend steadily. Push the throttle stick upward to release throttle lock
Four LEDs indicate the remaining battery life or charge status - a micro-USB to USB type A cable is included for recharging
Frequency 5.728 to 5.85 GHz
Range Up to 2625' / 800 m line-of-sight
Receiver Sensitivity 1% PER: -93 dBm
Working Current/Voltage 120 mA at 3.7 VDC
Connectivity 1 x Micro-USB for charging
1 x Trainer port for simulation software
Power Requirements Built-in LiPo Battery: 3.7 VDC, 2000 mAh
DJI Transmitter v3.0 for Phantom 2 Vision+ Quadcopter
  • Micro-USB Charging Cable
  • Reviews DJI Transmitter v3.0 Remote Controller for Phantom 2 Vision+ Quadcopter (5.8GHz, Built-In 2000mAh Battery) (Official DJI Malaysia Warranty)

    Login to leave review.
    Login to get access to Q&A