Shure BLX1288/P31 Dual-Channel Headset & Handheld Combo Wireless Mic System (J10: 584 - 608 MHz)
Shure BLX1288/P31 Dual-Channel Headset & Handheld Combo Wireless Mic System (J10: 584 - 608 MHz)

Shure BLX1288/P31 Dual-Channel Headset & Handheld Combo Wireless Mic System (J10: 584 - 608 MHz)

shure

SSK # SHR-BLX1288-P31-J10

Pre-order, Estimated 3-14 Days from Supplier
3 Months ShaShinKi Warranty
RM3,500.00

Shopping Point 17.500 = RM17.50

Key Features

  • J10 Frequency Band
  • Dual-Channel Wireless Receiver
  • BLX1 Bodypack Transmitter
  • PGA31 Headset Microphone
  • BLX2 Handheld Transmitter with PG58 Mic
  • One-Touch QuickScan Frequency Selection
  • Internal Antenna Diversity
  • 300' Operating Range
  • Batteries Included

The BLX1288/P31 Dual-Channel Combo Wireless System from Shure includes a BLX88 dual-channel wireless receiver, a BLX1 bodypack transmitter, a PGA31 headset mic, a BLX2 handheld transmitter with a PG58 microphone, and 4 AA batteries. The system is set to Shure's J10 frequency band and operates between 584 - 608 MHz.

Both the BLX1 bodypack transmitter and the BLX2 handheld transmitter have a 300' line of sight operation range with the BLX88 receiver. They are each powered by two included AA batteries that can provide up to 14 hours of operation. The BLX88 receiver features microprocessor-controlled internal antenna diversity that helps prevent interference and signal dropouts. Its one-touch QuickScan feature detects the most interference-free frequency and sets the channel to it for fast setup.

  • PGA31 Performance Headset Condenser Microphone

    The PGA31 Performance Headset Condenser Microphone from Shure is a wireframe headset cardioid condenser microphone that can be used for a variety of vocal, general speech, and performance applications. A windscreen is included.

    Wearable wireframe headset for multi-instrumentalists and active performers
    Permanently charged electret condenser element for detailed vocals
    Flexible gooseneck design and discrete adjustment options optimize microphone positioning for further source isolation
    TA4F (TQG) connector seamlessly integrates with existing Shure bodypack systems
    Tailored frequency response primed for great sound on vocals

  • BLX2 Handheld Transmitter with PG58 Microphone (J10: 584 - 608 MHz)

    The BLX2 Handheld Transmitter with PG58 Microphone from Shure is set to Shure's J10 frequency band between 584 to 608 MHz MHz and provides a 300' line of sight operating range. It is powered by two included AA batteries for up to 14 hours. It is compatible with Shure BLX wireless systems set to the same frequency band. A padded zipper case and microphone clip are included.


  • BLX88 Dual-Channel Wireless Receiver (J10: 584 - 608 MHz)

    The BLX88 Dual-Channel Wireless Receiver from Shure is a dual-channel receiver set to Shure's J10 frequency band and operates between 584 to 608 MHz. It has microprocessor-controlled internal antenna diversity for reduced signal interference and dropouts. The one-touch QuickScan frequency selection feature allows you to quickly locate the frequency with the least amount of interference available.

    Its front-panel dual-color LED status indicator displays green for normal levels and red when clipping for fast metering. It has two XLR outputs in additional to two instrument-level 1/4" outputs. The BLX88 can be used with up to 11 other compatible systems simultaneously per frequency band.


  • BLX1 Bodypack Transmitter (J10: 584 - 608 MHz)

    The BLX1 Bodypack Transmitter from Shure is designed for use with Shure's BLX wireless systems. It is set to the J10 frequency band and operates between 584 and 608 MHz. It has a TQG input and can be used with Shure lavalier, headset, earset and instrument microphones. With the optional WA302 adapter cable, the BLX1 can be used as a transmitter for guitar. The unit has a top panel mounted on/off switch as well as volume control for quick access while speaking or performing. The BLX1 is powered by the two included AA batteries for up to 14 hours.

  • PGA31 Performance Headset Condenser Microphone
    Type Electret condenser
    Frequency Response 60 Hz to 20 kHz
    Polar Pattern Cardioid
    Output Impedance 600 Ω @ 1 kHz, typical
    Audio Output Level -50 dBV/Pa
    Signal to Noise Ratio 66 dB @ 1 kHz
    Maximum SPL 145 dB, @ 1 kHz (1,000 Ω load)
    Dynamic Range 117 dB, @ 1 kHz (1,000 Ω load)
    Output Noise 28 dB, typical, A-weighted
    Power Requirements +5 V DC (nominal), 10 V maximum (DC bias)
    Polarity Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
    Cable 50" (1.3 m))
    Connector TA4F
    Weight 1.59 oz (45 g)
    Packaging Info
    Box Dimensions (LxWxH) 7.559 x 6.299 x 3.15"
  • BLX2 Handheld Transmitter with PG58 Microphone (J10: 584 - 608 MHz)
    Transmitter
    Audio Input Level 0 dB Gain: -20 dBV Maximum
    -10 dB Gain: -10 dBV Maximum
    Gain Adjustment Range 10 dB
    RF Output 10 mW, Typical (Varies by Region)
    Power Requirement 2x LR6 AA Batteries, 1.5 V Alkaline
    Housing Molded ABS
    Dimensions (Ø x L) 2.1 x 8.8" (53 x 224 mm)
    Weight 7.7 oz (218 g)
    Microphone
    Type Dynamic (Moving Coil)
    Polar Pattern Cardioid
    Frequency Response 60 Hz to 15 kHz
    Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
    Sensitivity -53 dBV/Pa, (2.2 mV), 1 Pascal=94 dB SPL (@ 1 kHz)
    Electromagnetic Hum Sensitivity 26 dB equivalent SPL in a 1 millioersted field (60 Hz)
    Temperature Range -20 to 153°F (-29 to 57°C)
    Relative Humidity 0 to 95%
    Packaging Info
    Box Dimensions (LxWxH) 11.0 x 5.4 x 3.3"
  • BLX88 Dual-Channel Wireless Receiver (J10: 584 - 608 MHz)
    Output 2x XLR Output
    2x 1/4" (6.35 mm) Output
    Output Impedance XLR: 200 ohms
    1/4": 50 ohms
    Audio Output Level XLR Connector: -20.5 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone)
    1/4": -13 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone)
    RF Sensitivity -105 dBm for 12 dB SINAD, Typical
    Image Rejection >50 dB, Typical
    Housing Molded ABS
    Power Requirement 12 to 15 VDC @ 320 mA, Supplied by External Power Supply (Tip Positive)
    Dimensions (H x W x D) 1.5 x 15 x 4.5" (40 x 388 x 116 mm)
    Weight 15.1 oz (429 g)
    Packaging Info
    Box Dimensions (LxWxH) 19.4 x 16.5 x 3.1"
  • BLX1 Bodypack Transmitter (J10: 584 - 608 MHz)
    Audio Input Gain: -16 dBV (Maximum), 10 dBV (Minimum)
    Gain Adjustment Range 26 dB
    Input Impedance 1 MOhm
    RF Output 10 mW, Typical
    Housing Molded ABS
    Power Requirement 2x LR6 AA Batteries, 1.5 V Alkaline
    Battery Life Up to 14 Hours
    Dimensions (H x W x D) 4.3 x 2.5 x 0.8" (110 x 64 x 21 mm)
    Weight 2.6 oz (75 g)
    Packaging Info
    Box Dimensions (LxWxH) 11.1 x 5.1 x 3.1"
Bundle Items
PGA31 Performance Headset Condenser Microphone
  • Windscreen
BLX2 Handheld Transmitter with PG58 Microphone (J10: 584 - 608 MHz)
  • 2 x AA Batteries
  • Microphone Clip
BLX88 Dual-Channel Wireless Receiver (J10: 584 - 608 MHz)
  • Power Supply
BLX1 Bodypack Transmitter (J10: 584 - 608 MHz)
  • 2 x AA Batteries

Reviews Shure BLX1288/P31 Dual-Channel Headset & Handheld Combo Wireless Mic System (J10: 584 - 608 MHz)

Login to leave review.
Login to get access to Q&A