Sekonic L-308DC DigiCineMate
Sekonic L-308DC DigiCineMate

Sekonic L-308DC DigiCineMate

sekonic

SSK # SKN-L308DC

SOLD
Discontinued
1 Year Sekonic Warranty
RM890.00
RM969.81

Shopping Point 4.450 = RM4.45

The convergence of imaging technology has not only created a new category of hybrid imaging making devices but more and more, image makers have branched out creatively and sometimes concurrently into cinema, video and photography.

The Sekonic L-308DC DigiCineMate is the perfect light meter for today's DSLR and digital practitioners. The intuitive LCD readout can be user-adjusted to display the specific functions needed for the task at hand. It reads incident light via the Lumisphere and Lumidisc. Slide the Lumisphere for reflected light readings.

In Cine mode the meter reads out in lux or foot-candles as well as fps (frames per second) and shutter angles. In Photo mode the L-308DC displays shutter speeds, f/stops or EV at ISOs from 3 to 8000. Besides ambient readings the L-308DC can meter flash in incident or reflected mode with or without a sync cord.

Finally, at a mere 3.4 oz, this light-reading tool is also lightweight.

Sekonic DigiCineMate L-308DC
The versatility of today's cameras is expanding at an amazing rate. Digital SLR cameras are used to record moving images and digital video cameras are used to capture still frames for printing. Whether you are a DSLR videographer, cinematographer, still photographer or involved in any facet of image capture, the Sekonic L-308DC is the perfect meter for you.
Three Ways to Meter
The compact, Sekonic L-308DC is the first meter that can be customized to display only specific functions needed for the task at hand for fast, easy operation.
  • DSLR videographers can make exposure readings and control light using shutter speeds and frame rates and get aperture settings with one-tenth stop accuracy. The display can be customized to match your camera in full, 1/2 or 1/3 step readings. Brightness display in lux and foot-candles make it perfect for lighting-design work.
  • Cinematographers can make exposure readings and control light using the most useful frame rates and shutter angles and get aperture settings with one-tenth stop accuracy. Exposure display can be customized to match your camera and lux and foot-candle readout enables quick setup of lights.
  • Traditional still-image photographers will enjoy shutter-priority display of a full range of ambient and flash functions including Cord and Cordless flash measurement as well as EV. All with one-tenth stop accuracy and display that can be customized to your camera.
  • Three Ways to Measure Light
  • The L-308DC's Lumisphere tells you about the light you are controlling. It is designed to integrate all of the illumination that falls on it, and the subject, including the key light, line light, hair light, eye lights, etc. Besides taking nearly foolproof exposure readings, its incident light reading enables you to set up and light a scene before the principal talent arrives. You can also "walk the set" to measure the evenness of the illumination.
  • Snap on the accessory Lumidisc to measure light for green screens, adjusting ratios and taking lux and foot-candle measurements.
  • Slide the Lumisphere to the right to measure light reflected from the subject or the brightness of light sources or window light.
  • Simplicity
    Nothing could be simpler. Set the ISO and take shutter-priority or frame-rate priority readings for aperture display from f/0.5 to f/90.9 with 1/10-stop accuracy. Hold the measuring button for continuous readings. Change shutter speed, frame rate or ISO settings after the measurement and the meter will automatically compensate the aperture setting to maintain proper exposure.
    Cord or Cordless
    Shutter-priority readings of flash light can be made with a synch cord or cordlessly at shutter speeds from 1 second to 1/500th second. Measurements include total amount of light, both flash and ambient, for the speed set for the best exposure. The L-308DC automatically resets after each reading in cordless mode to enable fast adjustment of flash brightness.
    Calibration
  • Calibration compensation can be used to tune the L-308DC to film or digital camera sensors or matching the L-308DC to other handheld meters.
  • Power
    The L-308DC is powered by a single AA-size alkaline battery that is easily obtainable worldwide.
    Measuring System Flash and Ambient
    Incident via Lumisphere, Lumidisc
    Reflected: Lens (light receiving angle 40°) Silicon photo diode
    Measuring Modes HD Cine Mode: Ambient (Time & f/stop, fps setting, lux/fc)
    Cine Mode: Ambient (fps & f/stop, Shutter angle setting, lux/fc)
    Photo Mode: Ambient (Time & f/stop, EV), Flash (Cord-in, Cordless)
    Measuring Range Ambient: EV 0 to 19.9
    Flash: f1.0 to 90.9
    Lux: 2.50lx to 190,000lx
    Foot-candle: 0.23fc to 17,000fc
    Display Range ISO: 3 to 8000 in 1/3 steps
    HD Cine Mode: Ambient:
    Aperture F0.5 to 90.9 in 1, 1/2, 1/3 steps
    Frame rate (f/s): 8, 12, 16, 18, 24, 25, 30, 32, 48, 50, 60, 64, 96, 100, 120, 128 f/s
    Shutter speed: Steps plus 1/24, 1/25, 1/30, 1/48, 1/50, 1/60, 1/100, 1/120 sec. Cine Mode: Ambient
    Aperture: F0.5 to 90.9 in 1, 1/2, 1/3 steps
    Frame rate (f/s): 8, 12, 16, 18, 24, 25, 30, 32, 48, 50, 60, 64, 96, 100, 120, 128 f/s
    Shutter angle: 45, 90, 180, 270, 360 degrees
    Photo Mode: Ambient
    Aperture: F0.5 to 90.9 in 1, 1/2, 1/3 steps
    Shutter speed: 60 to 1/8000 sec. in 1, 1/2, 1/3 steps
    EV: EV-6.0 to EV-27.2 in 0.1 step
    Photo Mode: Flash
    Shutter speed: 1 to 1/500 sec. in 1, 1/2, 1/3 steps plus 1/75, 1/80, 1/90, 1/100 sec.
    Aperture Incident: f/1.4 to f/90.9 (approx. f/124)
    Aperture Reflected: f/1.4 to f/90.9 (approx. f/124)
    Receptor Head Non-rotating, non-interchangeable
    Power Source 1 "AA" battery
    Dimensions 4.3 x 2.5 x 0.9" (109 x 63 x 23 mm)
    Weight 3.4 oz (96 g) without battery
    • Sekonic L-308DC DigiCineMate
    • Syncro Cap
    • Soft Case
    • Operating Manual
    • AA Battery
    • Lumidisc (with Pouch)
    • Quick Guide

    Reviews Sekonic L-308DC DigiCineMate

    Login to leave review.
    Login to get access to Q&A

    Sekonic L-308X Flashmate Light Meter
    In Stock
    Sekonic L-308X Flashmate Light Meter
    0

    RM939.00 RM1,079.00

    Sekonic Illuminometer i-346 Light Meter
    In Stock
    Sekonic Illuminometer i-346 Light Meter
    0

    RM899.00 RM924.00

    Sekonic C-7000 SpectroMaster Color Meter Bundle Kit
    Estimated 3-14 Days from Supplier
    Sekonic C-7000 SpectroMaster Color Meter Bundle Kit
    0

    RM13,099.00 RM19,999.00

    Sekonic C-7000 SpectroMaster Color Meter
    Estimated 3-14 Days from Supplier
    Sekonic C-7000 SpectroMaster Color Meter
    0

    RM12,999.00 RM16,999.00

    Sekonic L-398A Studio Deluxe III Light Meter
    Estimated 3-14 Days from Supplier
    Sekonic L-398A Studio Deluxe III Light Meter
    0

    RM790.00 RM863.00

    Sekonic L-478D Litemaster Pro Light Meter
    Estimated 3-14 Days from Supplier
    Sekonic L-478D Litemaster Pro Light Meter
    0

    RM1,433.00 RM1,666.00

    Sekonic Synchro Cord For Flash Meters
    Estimated 3-14 Days from Supplier
    Sekonic Synchro Cord For Flash Meters
    0

    RM137.00

    Sekonic 5 Degree Viewfinder (Spot Attachment) for L-358
    Estimated 3-14 Days from Supplier
    Sekonic 5 Degree Viewfinder (Spot Attachment) for L-358
    0

    RM639.00 RM672.00

    SOLD
    Sekonic L-308DC DigiCineMate
    Discontinued
    Sekonic L-308DC DigiCineMate
    0

    RM890.00 RM969.81