DJI Ronin-MX 3-Axis Gimbal Stabilizer (Official DJI Malaysia Warranty)
The Ronin-MX from DJI is dual-use gimbal suitable both for mounting on the Matrice 600 aerial platform as well as deployment closer to the ground. Improving over the Ronin-M, it features magnesium construction to yield high rigidity while keeping the weight down. The gimbal is suitable for cinema cameras, mirrorless cameras, and DSLRs weighing up to 10 pounds. Out of the box it supports two-operator operation, and includes a radio controller (transmitter) for the camera operator. There is also an optional Thumb Controller (available separately) for solo operation. When installed on the Matrice 600 aircraft, the gimbal can be controlled via the DJI GO app. An included universal mounting adapter allows it to be adapted for use with jibs, car mounts, and various other types of camera support equipment. There is also a handlebar for handheld use.
Load Weight (Reference Value) | 10 lb / 4.5 kg |
Angular Vibration Range | ± 0.02° |
Maximum Controlled Rotation Speed | Pan Axis: 200°/s Tilt Axis: 100°/s Roll Axis: 30°/s |
Mechanical Endpoint Range | Pan Axis Control: 360° Tilt Axis Control: +270° to -150° Roll Axis Control: ± 110° |
Controlled Rotation Range | Pan Axis Control: 360° Tilt Axis Control: +45° to -135° Roll Axis Control: ± 25° |
Sensors | Temperature sensor |
Processing | 32-Bit DSP Processor |
Expandability | D-Bus receiver supported |
Working Current | Static Current: 300 mA (at 16 V) Dynamic Current: 600 mA (at 16 V) Locked Motor Current: Up to 10 A (at 16 V) |
Wireless | Bluetooth 4.0 |
Wired | 1 x USB 2.0 |
Power Requirements | 4S Ronin-M battery |
Assistant Software | Windows XP or above Mac OS X 10.9 or above iOS 7.1 or above Android 4.3 or above |
Control Modes | Underslung Mode Upright Mode Briefcase Mode Aerial Mode Jib or Wirecam Mode |
Accessory Power Ports | 2 x 12 V Regulated P-Tap 1 x USB 500 mW 1 x DJI Lightbridge |
Camera Tray Dimensions | Maximum depth from the center of gravity on camera base plate: 4.7" / 120 mm Maximum height measured from top of camera base plate: 7.7" / 195 mm Maximum width: 6.3" / 160 mm |
Operating Temperature | 5 to 120°F / -15 to 50°C |
Dimensions (W x D x H) | Excluding Handle Bar: 11 x 14.6 x 13.4" / 280 x 370 x 340 mm Including Handle Bar: 22 x 14.6 x 17.3" / 560 x 370 x 440 mm |
Weight | Including Handle Bar: 6.11 lb / 2.77 kg Including Vibration Damper: 4.74 lb / 2.15 kg |
DJI Ronin-MX 3-Axis Gimbal Stabilizer
Handle Bar 2.4 GHz Remote Control Tuning Stand 2 x Intelligent Battery Charger Cable Pack Micro-USB Cable Camera Mounting Plate Upper Mounting Plate Vibration Absorber 2 x Camera Screw A (1/4"-20) 2 x Camera Screw B (3/8") 2 x Camera Screw C (1/4"-20) 2 x Camera Screw D (3/8") Lens Support 4 x Allen Wrench
Loading ...
Login to get access to Q&A
Reviews DJI Ronin-MX 3-Axis Gimbal Stabilizer (Official DJI Malaysia Warranty)