Rode smartLav+ Lavalier Condenser Microphone for Smartphones
The Rode smartLav+ is a lavalier microphone for your Apple or Android mobile device that is designed to deliver high-quality audio recording. The smartLav+ clips on to your shirt or lapel, and the sensitive, omnidirectional condenser capsule captures the sound equally from all sides of the microphone. This design lends to effective, hands-free recording of speeches, interviews, dictations and more.
The smartLav+ is equipped with a Kevlar-reinforced cable that has been strain tested up to 10kg to help ensure reliable performance. It uses a grey-sleeved TRRS connector to connect into your smartphone or tablet's headphone input and it works with most audio recording apps.
The smartLav+ also features improved sensitivity and higher signal-to-noise ratio over the original smartLav. The package comes with mic clip with cable management, a foam pop shield and a small carry pouch.
Compatible with iPhone 5S, iPhone 5, iPhone 5C, iPhone 4S, iPhone 4, iPad Air, iPad (3rd generation), iPad 2, iPad mini, iPod touch (4th and 5th generation) & many Android devices.
|Acoustic Principle || Pressure gradient |
|Active Electronics || JFET |
|Capsule || 0.10" (2.54 mm) |
|Polar Pattern || Omnidirectional |
|Address Type || End |
|Frequency Range || 60 Hz ~ 18 kHz |
|Output Impedance || 3k â„¦ Typical |
|Signal to Noise Ratio || 67 dB |
|Maximum SPL || 110 dB SPL (@ 1 kHz, 1% THD into 1 KΩ load) |
|Maximum Output Level || 189.0 dBu (@ 1 kHz, 1% THD into 1 KΩ load) |
|Sensitivity || -35 dB (17.8 mV @94 dB SPL) |
|Equivalent Noise Level || 27 dB-A |
|Connector || TRRS |
|Maximum Output || 189 mV |
|Dynamic Range || 83 dB typical |
|Dimensions || 46.5 x 0.18 x 0.18" (1180 x 4.5 x 4.5 mm), mic and cable |
|Weight || 0.211 oz (6.00 g) |
Rode smartLav+ Lavalier Condenser Microphone for Smartphones Foam Pop Shield Mic Clip Small Pouch
Login to get access to Q&A