The NTG-2 Complete Shotgun Microphone HDSLR Kit is a ShaShinKi Kit designed to eliminate the guesswork in configuring a shotgun microphone system for the new breed of video enabled DSLR and other interchangeable lens cameras. It delivers quality and reliability while remaining cost effective.
The NTG-2 from Rode NTG-2 is the featured shotgun microphone in this kit, supported by a universal shockmount, universal hand grip, cabled boom pole, windscreen, a right angled XLR cable and a impedance matching transformer cable for use with the video HDSLR. Rounding out the kit is a neoprene bag made to carry a boompole.
The kit is an all-in-one solution for event videos, budget film work, budget broadcasting, Electronic News Gathering (ENG) and field production applications that use an HDSLR camera. It can be used either on-camera, or as part of a secondary recording system.
This Kit Includes:
Rode NTG-2 Battery or Phantom Powered Condenser Shotgun Microphone
Transducer | Condenser |
Polar Pattern | Supercardioid |
Frequency Response | 20Hz to 20kHz |
Sensitivity | -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Signal-to-Noise Ratio | 76dB (1kHz rel, 1Pa; per IEC651, IEC268-15) |
Maximum Input Sound Level | 131dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Power Requirements | +48V phantom, 44V to 52V |
Output Impedance | 250Ω |
Output Connectors | 3-pin XLR balanced |
Pad | No |
Low Frequency Roll-Off | Selectable HPF @ 80Hz/12dB octave |
Dimensions | 10.94 x .87" (278 x 22mm) (Length x Diameter) |
Weight | 5 oz (161g) |
Rode WS6 Deluxe Windshield for the NTG2 and NTG1 Microphones
Dimensions | Maximum Microphone Length: 6.25" (160.5mm) Maximum Microphone Diameter: 0.82 to 0.88" (21 to 22.5mm) |
Weight | 50g (1.76 oz) |
K-Tek KE-89CC Avalon Series Aluminum Boompole with Internal Coiled XLR Cable
Material | Aluminum |
Sections | 4 |
Length | 2' 5"-7' 2" (0.76-2.19m) |
Weight | 1.11 lbs (0.50kg) |
Load Capacity | Not Specified By Manufacturer |
Pearstone/Kopul PM Series XLR M to Angled XLR F Professional Microphone Cable - 20' (6.1 m)
Cable Type | 3-Pin XLR balanced microphone cable |
Length | 20' (6.1 m) |
Shielding | Copper spiral shield |
Gauge | 24 AWG |
Contacts | Silver plated |
Connector 1 | XLR Male |
Connector 2 | XLR Angled Female |
Kopul LMT100 - Low to High Impedance Matching Transformer (1.5')
Connectors | XLR to 1/8" (3.5 mm) |
Auray Neoprene Boompole Bag for 34" Closed Boompole with Shotgun Mic and Softie
Material | Neoprene |
Type of Closure | Zipper with protective lining |
Dimensions (LxWxD) | 39.0 x 6.0 x 2.0" (100.0 x 15.5 x 5.5 cm) |
Weight | 15 oz (454 g) |
Kit Items
- Microphone Stand Mount
- Windscreen
- Zippered Pouch
Reviews Rode NTG-2 Complete Shotgun Microphone HDSLR Kit