The Ultimate Slider Bundle from Rhino Camera Gear includes the 42" stainless steel Slider Pro, ARC II 4-axis motorized head, Rhino Focus for ARC II, and high-speed and high-torque motors. It also includes interchangeable 24" carbon fiber rails for better mobility where applicable, and a hard carry case with designated compartments for the entire bundle. The ARC II is a highly advanced motorized pan and tilt device. With the slider, slider motors, ARC II, and Rhino Focus, you get a sophisticated 4-axis setup that lets you keyframe motion and rack focus. The high-speed slider motor is designed for horizontal slides while the high-torque motor is for incline and vertical shots.
Rhino Camera Gear Slider Pro (42")
The 42" Pro Slider from Rhino Camera Gear is an ultra-rigid, modular camera slider that supports loads up to 30 lb. This stainless steel slider is even more rigid than the previous version and uses an oversized knob to mount quickly and easily on your tripod, no slider spinning required. Use the Pro Slider with separately available components like the Flywheel for smooth manual slides, the High-Torque Motor for vertical motion, or the Arc II motion control unit. Optional carbon fiber rails are available to support various rig configurations.
The Rhino Pro Slider features all-terrain legs for leveling on almost any surface and a 3/8"-16 carriage screw for mounting your camera or ball head. This 42" slider incorporates a center and two end Tripod Quick Mounts. Vertical travel is enhanced by a newly designed end plate with a press-fit pulley mount that eliminates slippage.
Fits
Key Features
- 42" stainless steel rails
- Easy-to-use center and two end Tripod Quick Mounts
- Increased rigidity from previous version
- Interchangeable with separately available rails
- Supports loads up to 30 lb
- New end-plate design for smooth vertical moves
- Use with optional Flywheel, High-Torque Motor, and/or Arc II motion controller
- Camera carriage with 3/8"-16 screw
- Integrated carriage brake
- 3/8"-16 and 1/4"-20 mounting threads
- Folding all-terrain legs
Rhino Camera Gear Focus for Arc II
The Focus for Arc II from Rhino Camera Gear enables you to add precision focus moves to your Arc II motion control shots. Suitable for both slider and tripod use, the Rhino Focus works by shifting focus automatically between your two chosen keyframes.
This focus system features a cine-standard 0.8 MOD gear and mounts via its 15mm carbon fiber rod. It also includes an adjustable rubber lens gear and a power cable.
Rhino Camera Gear High Speed Slider Motor
Outfit your camera slider for high-speed shots with this High Speed Slider Motor from Rhino. This high-speed motor can attach to any Rhino slider and can connect to the Arc II for camera automation. The low-profile motor can move a 5 lb load at a 20° angle and can move at 5" per second. Both 24 and 42" motor cables are included with the motor.
Rhino Camera Gear High Torque Slider Motor
Outfit your camera slider for vertical-torque shots with this High Torque Slider Motor from Rhino. This high-torque motor can attach to any Rhino slider and can connect to the Arc II for camera automation. The low-profile motor can move a 10 lb load at a 90° angle and can move at 1" per second. Both 24 and 42" motor cables are included with the motor.
Rhino Camera Gear Interchangeable Carbon Slider Rails (24")
This pair of Interchangeable Carbon Slider Rails from Rhino Camera Gear enables you to easily change the length and load capacity of your Rhino slider. The 24" lightweight rails are constructed of precision-ground carbon fiber and are ultra-rigid, supporting up to 15 lb. A center Tripod Quick Mount enable you to quickly mount the rails.
Features
- 24" lightweight carbon fiber rails
- Easy-to-use Tripod Quick Mount in the center
- Supports loads up to 15 lb
Rhino Camera Gear Hard-Shell Slider Carrying Case
The dedicated Hard-Shell Slider Carrying Case is designed to safely transport your Rhino Camera Gear slider and its accessories. Constructed of aluminum and a composite, this locking case features a recessed top handle and wheels. It is lined with high-density EVA foam and has four accessory pockets in its lid.
This hard-shell case will fit your 24 or 42" Rhino slider, interchangeable rails, Rhino Arc II pan/tilt head, Rhino Focus unit, both High Speed and High Torque Motors, and Ultra-Fast Charger.
Fits
- Rhino slider (24 or 42")
- Interchangeable rails (24 or 42")
- Rhino Arc II
- Rhino Focus
- Rhino motor (both high speed and high torque)
- Ultra-fast charger
| Load Capacity | 30 lb / 13.61 kg |
| Tripod Mounting | 3 x 1/4"-20 Female Thread 3 x 3/8"-16 Female Thread |
| Material | Stainless Steel |
| Camera Mounting Screw | 3/8"-16 Male |
| Track Length | 42" / 106.68 cm |
| Weight | 11.1 lb / 5.03 kg |
| Package Weight | 12.5 lb |
| Box Dimensions (LxWxH) | 47 x 9 x 3" |
Rhino Camera Gear Focus for Arc II Specs
| Gear Mod | 0.8 |
| Rod Diameter | 0.59" / 15 mm |
| Material of Construction | Rod: Carbon Fiber |
| Dimensions | 4 x 1.5 x 1.5" / 102 x 38 x 38 mm |
| Weight | 9 oz / 255 g |
| Package Weight | 0.995 lb |
| Box Dimensions (LxWxH) | 8.6 x 5.5 x 3" |
Rhino Camera Gear High Speed Slider Motor Specs
| Speed | 5" / sec |
| Load Capacity | 5 lb at 20° Angle |
| Motor Connector | 1 x RJ45 |
| Weight | Not Specified by Manufacturer |
| Package Weight | 2.32 lb |
| Box Dimensions (LxWxH) | 7.7 x 6.4 x 4.8" |
Rhino Camera Gear High Torque Slider Motor Specs
| Speed | 1" / sec |
| Load Capacity | 10 lb at 90° Angle |
| Motor Connector | 1 x RJ45 |
| Weight | Not Specified by Manufacturer |
| Package Weight | 2.32 lb |
| Box Dimensions (LxWxH) | 7.5 x 6.4 x 4.7" |
Rhino Camera Gear Interchangeable Carbon Slider Rails (24") Specs
| Material of Construction | Carbon Fiber |
| Payload Capacity | 15 lb / 6.8 kg |
| Length | 24" / 61 cm |
| Weight | 1 lb / 454 g |
| Package Weight | 1.69 lb |
| Box Dimensions (LxWxH) | 24.8 x 6.3 x 2.6" |
Rhino Camera Gear Hard-Shell Slider Carrying Case Specs
| Material of Construction | Aluminum, Composite, EVA Foam |
| Dimensions | 48 x 18 x 6" 122 x 46 x 15 cm |
| Weight | 15.3 lb / 6.9 kg |
| Package Weight | 17.8 lb |
| Box Dimensions (LxWxH) | 49.75 x 18 x 6.75" |
- Rhino Camera Gear Slider Pro (42")
- Camera Carriage
- Rhino Camera Gear Pro Slider Interchangeable Rails (42")
- 2 x End Cap with All-Terrain Legs
- Rhino Camera Gear ARC II 4-Axis Motorized Pan/Tilt Head
- Rhino Camera Gear Focus for Arc II
- 15mm Carbon Fiber Rod
- Rubber Lens Gear
- Power Cable
- Rhino Camera Gear High Speed Slider Motor
- Motor Cable (24")
- Motor Cable (42")
- Rhino-Branded Box
- Rhino Camera Gear High Torque Slider Motor
- Motor Cable (24")
- Motor Cable (42")
- Rhino-Branded Box
- Rhino Camera Gear Interchangeable Carbon Slider Rails (24")
- Rhino Camera Gear Hard-Shell Slider Carrying Case
- Key
Loading ...
RM89.00 RM100.00
Reviews Rhino Camera Gear Ultimate Slider Bundle