Revo 23
Revo 23" Camera Track Slider

Revo 23" Camera Track Slider

revo

SSK # RV-RS-600

Pre-order, Estimated 3-14 Days from Supplier
No Warranty
RM800.00

Shopping Point 4.000 = RM4.00

Key Features

  • Small and Handy Slider
  • Smooth Slides with Rigs up to 21 lbs
  • Sideways, Forward, Back, Slanted Slides
  • Removable Feet with Rubber Tips
  • 1/4" & 3/8" Threads for Mounting Tripod
  • Non-Threaded Holes for Wall Mounting
  • Removable Camera Carriage
  • 1/4" & 3/8" Screws for Cameras / Heads
  • Four 1/4" Threads for Articulating Arms
  • Bubble Level for Measuring Evenness

The Revo 23" Camera Track Slider is a small and lightweight camera slider that you can conveniently carry from location to location and maximize as many of your scenes as possible with fluid motion. You can set the slider on its feet or mount it on a tripod and glide your camera left, right, forward or backward. A rig of up to 21 pounds can be attached and moved smoothly the entire 23 inches of the track.

A 1/4" and a 3/8" threaded screw-hole is positioned at the bottom center for mounting tripods. Aside from these, a few non-threaded holes run along the bottom, and if you can find a way to screw the slider to a wall by means of these holes, then you can execute wall-mounted vertical and horizontal glides and add even more versatility of movement to your scenes. You can also position the slider tilted on a tripod and have your glides slanted.

The slider is made of aluminum alloy, and the sliding camera carriage has plastic cups underneath by which it slides smoothly on the slider rails. The carriage has removable 1/4" and 3/8" screws for attaching a camera or fluid head, and it is itself removable so that you can comfortably attach the camera or head off of the slider. The carriage also has one 1/4" thread on each top corner so that in addition to a camera you can mount articulating arms with lights, mics and other accessories. A knob on the side of the carriage tightens to keep the carriage from moving and a bubble level on the top helps measure how even the slider is positioned. The slider's feet are removable too and attach on by included hex screws. The feet feature rubber tips on their bottoms to provide a secure grip and prevent the slider from moving about.

Key Features
  • Small and lightweight camera slider for smooth left, right, forward, backward and slanted glides
  • Supports rigs of up to 21 lbs
  • A 1/4" and a 3/8" thread at the bottom center for mounting a tripod
  • A few non-threaded holes along the bottom for wall-mounting
  • Removable sliding carriage with 1/4" and 3/8" screws for attaching a camera or fluid head
  • Four 1/4" threads on the top of the sliding carriage for mounting articulating arms with lights and mics
  • Bubble level for measuring evenness
  • Removable feet with rubber tips that provide a secure grip
Length 23" (58 cm)
Load Capacity 21 lb (10 kg)
Mount Type 1x 1/4" and 1x 3/8" screw for attaching camera / fluid head
1x 1/4" and 1x 3/8" thread for mounting tripod
Non-threaded holes along the bottom for wall mounting
4x 1/4" threads on sliding carriage for attaching articulating arms and other accessories
Material Aluminum alloy
Dimensions 3.5 x 2.7 x 23.6" (8.9 x 6.8 x 60 cm)
Weight 1.86 lb (.84 kg)
Revo 23" Camera Track Slider
 
  • Set of 2 Feet and 4 Hex Screws
  • 1/4" Camera Screw
  • 3/8" Fluid Head Screw
  • Allen Key
  • Instruction Manual
  • Reviews Revo 23" Camera Track Slider

    Login to leave review.
    Login to get access to Q&A

    Revo 23" Camera Track Slider
    Estimated 3-14 Days from Supplier
    Revo 23" Camera Track Slider
    0

    RM800.00