New products

• For Videographers & Sound Recordists
• 2 Ultralow-Noise Mic Pres via XLR Jacks
• No Gain Adjustment Needed
• 32-Bit Float Recording Avoids Clipping
• Headphone and Line Outputs
• Hold Switch Averts Unintended Operation
• USB Power / 8 Hours via AA Batteries
• microSD Card Recording / USB Audio I/O
• Waveform Display, Easy 1-Touch Controls
• Boompole- and Pocket-Friendly Design

• Has a unique streamlined sports car exterior design
• Strong Protection Performance
• Easy to carry

• Miniature Electret Condenser Microphone
• Connects Directly to Device
• 3.5mm TRRS Connector
• 35 Hz to 18 kHz Frequency Response
• Integrated Shockmount
• Adjustable Angle
• Requires No Battery
• Lightweight

• Concaved Groove for Thumb Rest
• Secure Grip During Shooting
• Added Comfort While Holding Camera
• Included Shutter Release Button
• Slides into Camera's Hot Shoe
• Exclusive FUJIFILM Engraving

• Concaved Groove for Thumb Rest
• Secure Grip During Shooting
• Added Comfort While Holding Camera
• Included Shutter Release Button
• Slides into Camera's Hot Shoe
• Exclusive FUJIFILM Engraving

• Haoge LUV-X54S 2in1 accessory set consists of a lens hood and UV filter.
• It is specially designed for the lens of the Fujifilm X100VI X100V camera.
• X100VI X100V Original Fujifilm lens cap can be mount onto the lens hood.
• Note: To use the lens hood, the user has to remove the ring on the top of the lens of Fujifilm X100V X100VI
• Thickness:15mm

• Dedicated Grip for FUJIFILM X100VI/X100V
• Increases Stability and Ergonomics
• Provides Unobstructed Access to Ports
• Features Arca-Type Compatible Plate
• Textured Finish Matches Camera Body
• Weighs 2.9 oz

• Haoge LUV-X54B 2in1 accessory set consists of a lens hood and UV filter.
• It is specially designed for the lens of the Fujifilm X100VI X100V camera.
• X100VI X100V Original Fujifilm lens cap can be mount onto the lens hood.
• Note: To use the lens hood, the user has to remove the ring on the top of the lens of Fujifilm X100V X100VI
• Thickness:15mm

• Dedicated Grip for FUJIFILM X100VI/X100V
• Increases Stability and Ergonomics
• Provides Unobstructed Access to Ports
• Features Arca-Type Compatible Plate
• Textured Finish Matches Camera Body
• Weighs 2.9 oz

• Antireflective Coating for Easy Viewing
• Ultrathin Optical Glass Construction
• Static Adhesion Leaves No Sticky Residue
• Multiple Layers of Protective Material
• Blocks UV Rays
• Maintains Touch-Screen Function
• Microfiber Cloth

• The Black Thumbs Up Grip attaches to your Fujifilm X100V X100VI via the hot shoe to dampen vibrations and provide stable, protected contact with the camera.
• This grip provides a more ergonomic structure to the camera, allowing for greater one-handed operation as well as more balance and less grip pressure required when shooting.
• You can securely grip the camera and hold it in any position with the thumb up.
• Provides a better balance and grip for the camera.

• The Black Thumbs Up Grip attaches to your Fujifilm X100V X100VI via the hot shoe to dampen vibrations and provide stable, protected contact with the camera.
• This grip provides a more ergonomic structure to the camera, allowing for greater one-handed operation as well as more balance and less grip pressure required when shooting.
• You can securely grip the camera and hold it in any position with the thumb up.
• Provides a better balance and grip for the camera.

• The Black Thumbs Up Grip attaches to your Fujifilm X100V X100VI via the hot shoe to dampen vibrations and provide stable, protected contact with the camera.
• This grip provides a more ergonomic structure to the camera, allowing for greater one-handed operation as well as more balance and less grip pressure required when shooting.
• You can securely grip the camera and hold it in any position with the thumb up.
• Provides a better balance and grip for the camera.

• Ultra-thin designed for Fujifilm Fuji X100V X100VI.
• The adapter ring facilitates the attachment of the lens hood or a 49MM thread filter to the lens.
• The original X100VI X100V lens cap can be mount onto the lens hood, so you can use the original lens cap without removing the hood.
• Note: To use the lens hood, the user has to remove the ring on the top of the lens of Fujifilm X100V X100VI
• Note: It can't be used for Fujifilm X70 X100 X100S X100T X100F

• Ultra-thin designed for Fujifilm Fuji X100V X100VI.
• The adapter ring facilitates the attachment of the lens hood or a 49MM thread filter to the lens.
• The original X100VI X100V lens cap can be mount onto the lens hood, so you can use the original lens cap without removing the hood.
• Note: To use the lens hood, the user has to remove the ring on the top of the lens of Fujifilm X100V X100VI
• Note: It can't be used for Fujifilm X70 X100 X100S X100T X100F

Haoge LH-X49W Lens Hood and Adapter for Fujifilm Finepix X100 X100s X100T (Replacing LH-X100 lens hood)

• MULTI-USE - Designed to chip, score and shape hardened materials like masonry mortar, soft stone, and concrete
• 5/8-INCH TIP - 5/8-inch (0.625-inch) wide, pointed tip for precision use in tight areas like between bricks
• CARBON STEEL - Drop forged from EN9 high carbon steel for lasting strength and durability
• GRIP GUARD - Large grip guard provides a comfortable handle on chisel and protection against missed strikes
• HARDENED EDGE - Hardened edge for cleaner, faster scoring with fewer blows and less tip deformation

• MULTI-USE - Durable tool ideal for cutting nuts, bolts, and shaping soft metals
• 1-INCH TIP - 1-inch wide cutting tip for precision use without damaging surrounding material
• CARBON STEEL - Drop forged from EN9 high carbon steel for lasting strength and durability
• HARDENED EDGE - Hardened cutting edge for cleaner, faster cuts with fewer blows
• GRIP GUARD - Large grip guard provides a comfortable handle on chisel and protection against missed strikes
•  

• TOP CHOICE OF GEOLOGISTS WORLDWIDE – The rock hammers of choice for rockhounds, prospectors & contractors across the globe.
• SQUARE FACE & POINTED TIP– This versatile rock pick hammer is designed to use the pick to crack open rocks & the hammer to drive chisels.
• FORGED IN ONE PIECE – The most durable, longest lasting rock hounding tools available are crafted from a single piece of solid steel and honed into the optimal design for use.
• PATENTED SHOCK REDUCTION GRIP - Reducing impact vibration by 70%, Estwing's molded shock reduction grip provides optimal slip-free comfort, durability and superior grip in all jobsite conditions

• Extra large LED display
• Simple 3-button control
• Auto Hold feature
• Custom carrying case
• Deviation: <1% H
• Accurate and repetitive deviation = 20~90HSA
• HSA <+/-1 grade