Maha Powerex C9000Pro Professional Charger-Analyzer (4AA Battery Charger / Analyzer for Tamiya, Speedlight, etc.)
Maha Powerex C9000Pro Professional Charger-Analyzer (4AA Battery Charger / Analyzer for Tamiya, Speedlight, etc.)

Maha Powerex C9000Pro Professional Charger-Analyzer (4AA Battery Charger / Analyzer for Tamiya, Speedlight, etc.)

maha powerex

SSK # MH-C9000PRO-E

In Stock
1 Year Maha Warranty (ShaShinKi is the Malaysia Authorised Sole Distributor)
RM325.00

Shopping Point 1.625 = RM1.63

Key Features

  • 4 independent charging slots for AA/AAA NiMH Rechargeable Batteries
  • 4 Modes of Operation: Charge, Break-In, Discharge, and Refresh & Analyze
  • Memory Settings: Remembers the last settings that were used
  • Easy Setup: Set settings for 1 slot and apply same settings to all slots
  • Large backlit LCD display with On/Off option
  • Displays Capacity, Voltage, Time, and Rate
  • Optional car adapter

Powerex MH-C9000PRO Professional Charger-Analyzer

The Powerex MH-C9000PRO Professional Charger-Analyzer charges 1 to 4 AA and AAA NiMH/NiCD rechargeable batteries via 4 independent charging slots in about 1 hour. The charger is compact sized, measuring at 4.25” x 4.25” x 2” (LWH) and has a large backlit LCD screen with an on and off option. There are ten selectable charge and discharge rates from 0.2A to 2.0A and 0.1A to 1.0A respectively.

4 Operational Modes:

CHARGE MODE
  • - Charging current adjustable from 0.2A to 2.0A in 0.1A increments.
  • - Useful when battery needs to be recharged without determining the capacity of the battery. It should be used on batteries known to be in good condition and have been in continuous use.
BREAK-IN MODE
  • - Applies a 16-hour 0.1C charge (0.1 times the capacity of the battery), rest for one hour, followed by a 0.2C discharge, rest again, and finally a 16-hour 0.1C recharge again.
  • - This process is also known as “Forming Charge.” Also recommended with batteries that cannot be rescued by the Refresh & Analyze mode.
  • - The process follows the IEC standard for determining battery capacity.
DISCHARGE MODE
  • - Discharging current adjustable from 0.1A to 1.0A in 0.1A increments.
  • - Useful for analyzing the amount of charge stored in the battery. Battery not recharged at the end of the cycle.
REFRESH & ANALYZE MODE
  • - First recharges the battery, rest for two hours, discharges, rest, then recharges again. Charging and discharging rates are programmable.
  • - Reports the discharge capacity at the end of the cycle.
  • - Useful when the battery capacity needs to be determined. Also useful for battery with degraded performance.

Specifications:

Supported Batteries AA / AAA
Number of Cells  1 to 4
 Supported Battery Chemistry  NiMH / NiCD
Charge Time  1 Hr
Charge Rate Programmable from 0.2A to 2.0A in increments of 0.1A
Discharge Rate Programmable from 0.1A to 1.0A in increments of 0.1A
Battery Conditioner  Yes
Display Type  Backlit LCD
Charger Input Voltage  DC: 12V 2.0A
Power Supply Input  AC: 100-240V 50/60Hz
Car Adapter  Yes (Sold Separately)

1 x Powerex C9000Pro Professional Charger-Analyzer

Reviews Maha Powerex C9000Pro Professional Charger-Analyzer (4AA Battery Charger / Analyzer for Tamiya, Speedlight, etc.)

Login to leave review.
Login to get access to Q&A