Nikon HN-30 Lens Hood (Screw-In) for 200mm f/4.0 D-AF Micro Lens
Nikon HN-30 Lens Hood (Screw-In) for 200mm f/4.0 D-AF Micro Lens

Nikon HN-30 Lens Hood (Screw-In) for 200mm f/4.0 D-AF Micro Lens

nikon

SSK # NK-HN30

Estimated 3-14 Days Delivery
No Warranty
RM148.00

Shopping Point 0.740 = RM0.74

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. This dedicated lens hood is designed to match the specific focal length of the lens it was designed for.

Reviews Nikon HN-30 Lens Hood (Screw-In) for 200mm f/4.0 D-AF Micro Lens

Peter
29/06/2015
80
As it says this is a screw on hood, if you have a thin profile filter I would not use it, the filter would have to come off. I knew it was a screw on hood when I purchased it and thought it would be OK to use with my filter attached - I don't like the idea of the small amount of thread on my filter holding it so I take the filter off to use it - not so convenient so I hardly use this hood. Really a waste of money unless you are doing a lot of macro outside in the sun. Indoors the lighting is controlled - do you need a hood? You also have to be carefull when fitting the hood because of the metal thread.
Login to leave review.
Login to get access to Q&A
Nikon HN-30 Lens Hood (Screw-In) for 200mm f/4.0 D-AF Micro Lens
Estimated 3-14 Days Delivery
Nikon HN-30 Lens Hood (Screw-In) for 200mm f/4.0 D-AF Micro Lens
80

RM148.00