Use the Mevo Live Event Camera and Mevo Boost, along with your iOS device, for hours of live streaming. Pack both the camera and battery extension into the dedicated carrying case when you're done. The included three-section stand extends from 25 to 58", and has a detachable 1/4"-20 mount ball head for maximum flexibility. A carrying bag is included for transporting the stand.
Livestream's Mevo Live Event Camera combines a camera, a live streaming platform, and a video switcher to form an all-in-one story-telling device. Despite its palm-sized form-factor, the Live Event Camera fits a UHD 4K sensor behind a 150° wide-angle lens. This configuration endows the Live Event Camera with the capability of supporting 9 virtual camera angles at 720p resolution. Each virtual angle is controllable and selectable via the free iOS app (requires iOS 9 or later operating on iPhone 5s or newer). Using touch-based gestures; you can control each angle as if it was a real camera with a zoom lens on a tripod. With the Live Event Camera you can stream directly on the Livestream, Facebook Live, Periscope, and Twitter platforms.
If you have a Livestream subscription, or an account on Facebook, Periscope, or Twitter, you can connect the Live Event Camera via Wi-Fi, and broadcast your event over the web, having this tiny camera replace up to 9 physical cameras and a switcher. Better yet, the camera can record internally and stream simultaneously. The best connection scenario is having the camera connect to a broadband Wi-Fi network, which it can leverage for the most reliable video. However, if you connect it directly to your iPhone's access point, you can stream using your cell provider's LTE network (data charges may be applicable depending on the provider). Quality will automatically adapt to the available bit rate(5 Mbps minimum required for streaming), so your viewers will experience the best quality possible for a given scenario.
Atop the camera is a status LED which displays current recording and network connection status. It can also act as a tally light, illuminating the approximate direction the current virtual camera is pointing. A rear USB port can be used for power, charging the internal battery, and data transfer from the microSD card to a computer. The internal battery will last for up to an hour on a full charge. For longer events, a 10' USB power cable is included, so when the camera is plugged in, there will be ample slack for placing the camera away from the wall.
|Sensor||Not Specified by Manufacturer|
|Sensor Resolution||12.4 MP|
|Effective Pixels||Not Specified by Manufacturer|
|Angle of View||Ultra Wide: 150°|
|Video Format|| 3840 x 2160p at 30 fps (40 Mb/s H.264) |
1920 x 1080p at 30 fps (20 Mb/s H.264)
1280 x 720p at 30 fps (10 Mb/s H.264)
|Exposure Modes||Modes: Auto|
|White Balance Modes|| Auto |
|Tripod Mount||5/8" - 27|
|Dimensions (W x H x D)||2.0 x 2.5 x 2.0" / 50.0 x 63.0 x 50.0 mm|
|Weight||4.6 oz / 130.4 g|
|Box Dimensions (LxWxH)||7.0 x 4.9 x 4.4"|
|Battery Capacity||12,000 mAh|
|Connectors|| 1 x 10/100 Ethernet (RJ45) |
1 x USB type-A
1 x USB micro-B
|Power Output||Via USB type-A: 5 VDC @ 0.5 A|
|Power Input||Via USB micro-B: 5 VDC @ 2.1 A, 9 VDC @ 2 A, or 12 VDC @ 1.5 A|
|Environmental||Weatherproof to IPX4 rating|
|Dimensions||6.2 x 2" / 157 x 50 mm|
|Weight||10.6 oz / 30 g|
|Box Dimensions (LxWxH)||8.0 x 4.8 x 4.3"|