This kit from ShaShinKi.com combines the Manfrotto MT190XPRO4 Aluminum Tripod with the MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick Release System. The tripod extends to 67.5", folds to 23.7", and weighs 5.7 lb, while holding up to 15.4 lb.
Manfrotto's Quick Power Lock system allows you to completely extend the 4-section legs with just one hand. The rapid center column can be used in standard vertical mode or it can be swung into horizontal position like a boom. With the column in the 90° position, and the legs at their widest angle, the tripod can place your camera only 3.2" above the ground. This is perfect for macro work or low angle shots. An Easy Link plug is built into the tripod's spider for adding any of Manfrotto's flexible or articulated arms to hold lights or reflectors. A rotating bubble level is included just below the ball head so you can view it regardless of the tripod's position. The MHXPRO-BHQ2 XPRO Ball Head is strong enough for most applications and ideally suited for this equally sturdy tripod. The XPRO lets you fine-tune your adjustments, thanks to separate knobs for both the ball and the 360° panning as well as a friction control knob for more exacting placement. The 200PL quick release clamp and plate allow for quick camera attachment and removal, and two bubble levels let you adjust your camera so the horizon is level. A numbered scale around the base of the head makes repeating exact pans an easy task.
The black, redesigned MT190XPRO4 Aluminum Tripod from Manfrotto builds on the success and popularity of the previous 190 series with professional hardware and convenience features that make it even easier to use than its predecessor.
Set up is faster than ever with Manfrotto's Quick Power Lock System that allows you to completely extend the tripod legs with just one hand. Once set up you can use the MT190XPRO4's rapid center column in standard vertical mode or swing it into horizontal position like a boom with Manfrotto's 90° Column feature. Enlarged tabs on the individual leg angle selectors allow you to get down to only 3.2" for macro work with the column in horizontal mode. And once you're down there you can attach any of Manfrotto's flexible or articulated arms to hold lights or reflectors via the Easy Link plug built into the tripod's spider.
Convenience features include grippy, rubber leg warmers on two legs for cold or inclement weather and a bubble level that rotates so that you can see it easily regardless of the tripod's position. Finally, Manfrotto's insistence on form following function has yielded a tripod that you'll not only be happy to use but you'll be happy to be seen with, too.
This XPRO Magnesium Ball Head from Manfrotto features an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. RC2 compatible quick release plates such as the 200PL-14 can be removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be instantly reattached. The cam lock also features a safety catch to prevent the 200PL-14, or another compatible quick release plate from accidentally disconnecting.
The XPRO Magnesium Ball Head with 200PL-14 Quick Release Plate has a load capacity of 22.1 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. By loosening this XPRO Magnesium Ball Head's primary locking knob, its ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Toward the ball head's base is a secondary locking knob that controls the ability to rotate the head 360°. An additional knob opposite the secondary locking knob can be rotated to apply tension control to the ball-and-socket joint's movements.
Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the 200PL-14 quick release plate which measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface.
|Load Capacity||15.4 lb / 7 kg|
|Maximum Working Height||63" / 160 cm|
|Max Height without Center Column||53.2" / 135.1 cm|
|Minimum Working Height||3.2" / 8.1 cm|
|Folded Length||19.2" / 48.8 cm|
|Head Mount Type||3/8"-16 Screw|
|Weight||4.6 lb / 2.1 kg|
|Leg Lock Type||Flip Lock|
|Independent Leg Spread||Yes|
|Leg Diameter||Not Specified by Manufacturer|
|Tripod Feet Features||Rubber|
|Center Column Sections||1|
|Center Column Extension Type||Rapid|
|Lateral / 90-Degree Center Column||Yes|
|Box Dimensions (LxWxH)||21.9 x 5.4 x 5.4"|
|Head Type||Ball Head|
|Base Mount||3/8"-16 Thread|
|Camera Mounting Screw||1/4"-20 Male|
|Quick Release Plate Type||RC2|
|Load Capacity||22.1 lb / 10.02 kg|
|Number of Bubble Level(s)||2|
|Independent Pan Lock||Yes|
|Pan & Tilt Range|
|Lateral Tilt||-90° to +40°|
|Vertical Tilt||-40° to +40°|
|Ball Sphere Diameter||1.77" / 45.0 mm|
|Dimensions||H: 4.5 x W: 2.4" / H: 115.1 x W: 60.0 mm|
|Weight||17.6 oz / 0.50 kg|
|Box Dimensions (LxWxH)||5.3 x 4.9 x 3.5"|