DJI Lightbridge 2.4G Full HD Video Downlink with OSD and Control (Official DJI Malaysia Warranty)
The Lightbridge 2.4G Full HD Video Downlink with OSD and Control from DJI is designed to provide a complete FPV wireless relay solution, combining the video downlink, OSD (on screen display) data, and control signal in one system. It features two key components, one for the air end and one for the ground end. The air end component is a module that installs in or on the aircraft and features HDMI and composite video inputs. It also communicates with the flight computer, sending pilot inputs from the radio controller (transmitter) to the flight controller and receiving flight data from the instrumentation for the sake of the OSD. The air end module can also send a control signal to the gimbal for in-flight operation of camera movements.
The ground end component features the form factor of a wireless router. It can be battery powered from an internal 4000 mAh battery that lasts up to 4.5 hours or an external 3S to 6S Li-Po battery, available separately. To operate the aircraft, the system allows you to use your regular 2.4 GHz radio controller and will also receive a gimbal control signal. To view the video feed and OSD overlay you will need an Android mobile device running the Lightbridge app, a free download from DJI. There is a powered USB port on the ground end to connect your mobile device and keep its battery from running down.
Wireless Range | Up to 1 mile / 1.7 km (outdoor and unobstructed) |
EIRP | 1000 mW |
Receiver Sensitivity (1% PER) | -101 dBm to ±2dBm |
Working Frequency | 2.4 GHz ISM |
Antenna Gain | Air End: 2.0 ±0.7 dBi at 2450 MHz Ground End: 5.0 ±0.7 dBi at 2450 MHz |
Operating System | Mobile App: Android 4.1.2 or later |
Recommended Devices | Samsung Galaxy Note3 QCOM, N9005, N9006 Samsung Galaxy Note3 Exynos, N900 Samsung Galaxy S4 Samsung Galaxy Mega Optimus G Pro LG Electronics G2 Sony Xperia Z (L36h) Sony Xperia Z Ultra (XL36h) |
Antenna Connector | Air End: MMCX Male Ground End: 2 x SMA Male |
Power Requirement | Air End: 3S to 6S lithium-polymer (LiPO) Ground End: Internal battery or 3S to 6S lithium-polymer (LiPO) |
Power Consumption | Air End: 700 mA ±20 mA at 12V Ground End: 600 mA ±10 mA at 12V |
Operating Temperature | 14 to 122°F / -10 to 50°C |
Dimensions (L x W x H) | Air End (without Antennas): 2.7 x 1.9 x 0.8" / 68 x 48 x 21 mm Ground End (without Antennas): 4.9 x 3.5 x 0.8" / 125 x 90 x 20 cm |
Weight | Air End (without Antennas): 2.5 oz / 71 g Ground End (without Antennas): 10.4 oz / 295 g |
DJI Lightbridge 2.4G Full HD Video Downlink with OSD and Control
Loading ...
Login to get access to Q&A
Reviews DJI Lightbridge 2.4G Full HD Video Downlink with OSD and Control (Official DJI Malaysia Warranty)