The 31.5" long Konova K2 Slider supports loads up to 39.6 lb and features roller bearings that provide smooth, stable, and quiet operation. The slider can be supported using a single tripod or a pair of tripods/stands thanks to 1/4"-20 threads located on the underside of the track and positioned at the center and at either end. Additionally, there are threaded holes at the sides of the slider that enable you to mount it vertically, for expanded creative possibilities. For ground-level shooting, a pair of height and angle-adjustable legs with rubber ball feet that screw into the sides of the slider are included.
The slider carriage features a 3/8"-16 mounting point for attaching a fluid head or ball head, while also offering two 1/4"-20 threaded holes should you want to mount your camera or an accessory on an articulating arm. The resistance of the carriage can be dialed to taste quickly using a red friction adjustment knob, or with more finesse using a wrench to adjust tension. A metric ruler running the length of the slider makes it easy to perform precise and repeatable camera movements. Should you wish to expand the system in the future, you can choose to add an optional crank handle kit or one of the motion controller options.
|Load Capacity||39.6 lb / 18 kg|
|Tripod Mounting||4 x 1/4"-20 Female Thread
4 x 3/8"-16 Female Thread
|Diameter||0.24" / 6 mm|
|Camera Mounting Screw||3/8"-16 Male|
|Dimensions||ø: 0.67 x H: 0.31" / ø: 17.00 x H: 7.97 mm|
|Number of Bearings||3|
|Track Length||31.5" / 80 cm|
|Track Width||1.84" / 46.76 mm|
|Track Height||0.73" / 18.6 mm|
|Weight||3.2 lb / 1.45 kg|
|Package Weight||7.8 lb|
|Box Dimensions (LxWxH)||34.5 x 5.7 x 5"|