Impact Digital Monolight 300W/s (120VAC)
Impact Digital Monolight 300W/s (120VAC)

Impact Digital Monolight 300W/s (120VAC)

impact

SSK # IML-VSD300

Estimated 3-14 Days Delivery
6 months ShaShinKi Warranty
RM2,400.00

Shopping Point 12.000 = RM12.00

Key Features

  • Reflector, Sync Cord

The Impact Digital Monolight 300W/s (120VAC) as part of the VSD Series of monolights is proof that a 300 watt/second monolight does not need to be expensive. The VSD300 provides enough stored power to easily light a portrait or small still-life setup. It has features found on monolights that cost twice as much.

This monolight has a digital readout coupled with its four-stop power variator. It accepts Bowens monolight reflectors and head accessories. The VSD300 has cushioned touch-pad function control buttons. Power is adjustable in 1/10 stop increments, from full to 1/8 power. Its model light intensity may be controlled coupled to, or independent from the strobe power levels you select.

The VSD300 is available as part of several complete lighting kits. A slightly more powerful version of this light is the VSD400.

This monolight has a limited "Auto Dump" feature, which automatically fires the strobe when you reset to a lower power level.
Built-in optical slave "sees" the light from other flashes, and fires this monolight automatically.
A Sync Cord with miniplug to PC connection is included.
Its recycle beep tone may be switched on or off.

Included Item Details

a) Impact - White Translucent Umbrella (43")

Umbrellas soften, broaden, and diminish the light output of any tungsten or flash light source. Umbrellas with a white interior will soften and weaken light more than an umbrella with a silver lining. A white umbrella without a black backing may also be used as a makeshift softbox, although the use of the light will not be as efficient as with a lightbox.

Choosing umbrella size is determined by the size of the subject, and the strength of the light supply being used. Choosing an umbrella surface is as subjective as choosing a paint and brush.

This Impact 43" White Translucent Umbrella is suggested for use in mid-length portraits for one or two persons.

Open Diameter 43" (109 cm)
Closed Length 28.3" (71.8 cm)

 b) Impact - Air-cushioned Light Stand (Black, 8')

This aluminum Impact 8' Air-cushioned Light Stand is 4-section light support with sure-twist section locks.

If you forget to tighten any section with your light mounted, the light slowly descends, thanks to the air-cushioned action. This useful feature saves equipment and fingers from harm during busy photo sessions.

Air Cushioned
Protects equipment from impact damage.
Compact Design
Will fit easily into most location cases.
Accepts Casters
  • Eases positioning of heavy lights
  • Available as accessories
  •  
    Minimum Height 26.75 in (68 cm)
    Maximum Height 8 ft (2.4 M)
    Closed Length 27 in (68.5 cm)
    Footprint Diameter 3 ft (91.4 cm)
    Leg Tip 20mm
    Weight 2.4 lbs (1 kg)
    Maximum Load 7.5 lb (3.4 kg)
    Attachment Size 5/8 in stud with 1/4"-20 in threaded tip
    Accepts Wheels Yes
    Air Cushioned Yes
    Maximum Watt/Seconds 300
    Guide Number 182 in feet, @ ISO 100
    Recycle Time 2 sec @ full power
    Flash Duration Not Specified by Manufacturer
    Flash Variability Full to 1/8 power in 1/10 stop increments
    User Replaceable Flashtube Yes
    Changeable Reflector Yes
    Modeling Light Wattage 100
    Voltage Stabilization Not specified by manufacturer
    Flash Ready Indicator LED on test button
    Operating Voltage 110-120VAC, 60Hz
    Built-in Slave Cell Yes, 10 m range
    Circuit Protection Fuse
    Fan Cooled No
    Auto Dump Yes - limited - strobe fires automatically as power is turned down
    Dimensions 11.6 x 8.5 x 6" (29.5 x 21.6 x 15.2 cm) with 6" reflector
    Weight 3.5 lbs (1.6 kg)
    Impact Digital Monolight 300W/s (120VAC)
  • Flashtube (FT300)
  • 100W Modeling Light
  • 7" Grid Reflector
  • Mini to PC Sync Cord
  • Spare Fuse
  • Included Free

    • Umbrella - White Translucent (43")
    • Air-cushioned Light Stand (Black, 8')

    Reviews Impact Digital Monolight 300W/s (120VAC)

    Login to leave review.
    Login to get access to Q&A
    Impact Digital Monolight 300W/s (120VAC)
    Estimated 3-14 Days Delivery
    Impact Digital Monolight 300W/s (120VAC)
    0

    RM2,400.00