An enhanced version of its predecessor, the AD200Pro TTL Pocket Flash Kit from Godox is built around a unique flash source with a standard speedlight head and a bare bulb head that give you the option of two distinctly different qualities of light. The kit comes with the two heads, lithium battery, charger, and carry case.
The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish, or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200Pro has impressive core features such as 200Ws of power adjustable in 9 steps from 1/256 to 1/1, recycling from 0.01 to 2.1 seconds, and flash durations as short as 1/15,380 sec. The flash runs on a removal, rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.
The AD200Pro has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user's choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head's built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, and FUJIFILM cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-Speed Sync up to 1/8000 second, power level, modeling lamp, and ready beeper at distances up to 328'. Firmware updates are obtainable on the Godox website.
Using the 2.4 GHz Godox X wireless radio system, the XProF TTL Wireless Flash Trigger can be used to effectively and reliably trigger flashes from up to 328' away, and when used with compatible flashes and receivers users will have the added benefit of remote power control. This model is compatible with Fujifilm TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control options along with settings for working with system-specific features. For ensuring maximum reliability and control, users can set up 16 groups on one of 32 channels and can then access 99 wireless ID settings for limiting interference from other nearby systems.
In addition to basic manual and TTL control modes, other settings are available, including stroboscopic flash and second-curtain sync. Users can adjust flash exposure compensation from -3 to +3 EV as well as wirelessly control the modeling light, zoom setting, and more. For using the XProN with other camera systems there is a 2.5mm sync port that supports triggering via a wired connection. Also, a USB Type-C port is present for firmware updates and the devices run on two AA batteries for convenience.
Maximum Watt/Seconds | 200 |
Compatibility | TTL with Canon, Nikon, Sony cameras with optional X1-C, X1-N, and X1-S transmitters TTL with Olympus, Fujifilm cameras with optional X1T-O and X1T-F transmitters |
Control | Manually on unit Via X1 Transmitter which will Wirelessly Control: Flash Mode: TTL, Manual, Multi (Stroboscopic), Power Level Modeling Lamp On/Off, Beeper on/off First and second curtain sync, High Speed Sync |
Guide Number | At Full Power: Speedlight Flash Head: 170.6' / 52 m ISO 100 @ 35 mm Bare Bulb Flash Head: 197' / 60 m ISO 100 with AD-S2 reflector @ 28 mm |
Color Temperature | 5600K (±200K) |
Recycle Time | 0.01 to 2.1 Seconds |
Flash Duration | Speedlight Flash Head at T0.1: 1/220 to 1/15,380 Second Bare Bulb Flash Head at T0.1: 1/220 to 1/13,510 Second |
Flash Variability | 9 Steps: 1/256 to 1/1 |
Flash Delay | Yes, 0.01 to 30 Second |
Flash Modes | Wireless Off: Manual/Multi Wireless Radio On: TTL/M/Multi Stroboscopic: up to 90 times (99 Hz) |
Modeling Light | Uses Speedlight Head: Auto turn off after 30 minutes |
Sync Mode | High-Speed Sync up to 1/8000 Second First Curtain Sync and Second Curtain Sync |
Flash Exposure Compensation | ±3 Stops in 1/3 Stop Increments |
Flash Ready Indicator | LED, Beep Flash Hibernates Automatically After 30 Minutes of Non-use |
Built-in Slave Cell | S1 and S2 Optical Slave Modes 2.4 GHz Radio System |
Wireless & Radio Specifications | Function: Slave or Off Channels: 32 Groups: 5 (A, B, C, D, E) Range: 328' / 100 m |
Mounting | 1/4"-20 Female Threads |
Fan Cooled | No |
Replaceable Flashtube | Yes, in Bare Bulb Head |
Connectors | 3.5 mm Sync Input Wireless Control Port USB Port |
Battery | Lithium, 14.4 V / 2900 mAh Power remaining indicator |
Number of Flashes @ Full Power | 500 |
Dimensions | 6.7 x 3.0 x 2.0" / 172 x 75 x 54 mm Without Flash Head |
Weight | 20.8 oz / 590 g Without Flash Head and Battery |
Package Weight | 4.225 lb |
Box Dimensions (LxWxH) | 9.9 x 7.5 x 3.9" |
Channels | 32 |
Groups | 16 |
Wireless Range | 328' / 100 m |
Radio Frequency | 2.4 GHz |
Control Modes | Manual, TTL, i-TTL |
EV Range | ±3 (1/3 Increments) |
Sync Speed | 1/8000 Sec |
Ports | 1 x 2.5 mm (Flash) 1 x USB Type-C |
Battery Type | 2 x AA |
Dimensions | 3.5 x 2.3 x 2" / 90 x 58 x 50 mm (Transmitter) |
Weight | 2.8 oz / 80 g |
Package Weight | 0.4 lb |
Box Dimensions (LxWxH) | 4.9 x 4.8 x 2.6" |
Reviews Godox AD200Pro TTL Pocket Flash Kit + XProF Trigger Kit for Fujifilm Cameras