Futaba 14SGH 14-Channel 2.4 GHz Computer Radio System for DJI Spreading Wings S900 and S1000+ Drone
Futaba 14SGH 14-Channel 2.4 GHz Computer Radio System for DJI Spreading Wings S900 and S1000+ Drone

Futaba 14SGH 14-Channel 2.4 GHz Computer Radio System for DJI Spreading Wings S900 and S1000+ Drone

dji

SSK # FTB-FUTK9411

Pre-order, Estimated 3-14 Days from Supplier
1 Year Futaba Warranty
RM4,195.00

Shopping Point 20.975 = RM20.98

Key Features

  • 2.4 GHz FASSTest Modulation
  • Heli-Optimized: Smooth Throttle Gimbal
  • Fixed, Heli, and Glider Programming
  • Gyro, Motor, and Fuel Mixing
  • 30 Model Memory with 10 Character Names
  • Memory Expandable with SD/SDHC Card
  • Programming Port and Earphone Jack
  • Mode 2 Configuration
  • R7008SB Receiver Included
  • Battery and Charger Included

The heli-optimized 14SGH 14-Channel 2.4 GHz Computer Radio System from Futaba is a transmitter (radio controller) that can be programmed to control a multitude of RC aircraft, including fixed-wind planes, helicopters and multi-rotors, and gilders. It can also be used with certain production equipment, such as video stabilizer gimbals, that have compatible receivers. The transmitter features 14-channels and supports receivers with the FASSTest, FASST, and S-FHSS protocols. The "H" in the model number indicates that the throttle gimbal is smooth rather than ratcheted, which is considered the preferred arrangement by many heli fliers.

The programmable computer is able to store settings for up to 30 models internally, and this memory can be expanded using an SD or SDHC card up to 32GB in capacity. To access the menu to change settings or view data from the aircraft (where supported) there is a 1.8 x 3" back-lit LCD screen. The transmitter is configured for Mode 2. Mode two is the most common in the U.S., however users in other countries may be accustomed to a different Mode. In Mode 2, roll and pitch are controlled with the pilot's right hand while yaw and throttle are controlled with the pilot's left hand.

Free user-updatable software - simply load the update on an SD card
10-character user naming and 10-character model naming
SensorTouch programming technology
Rubber grips on the sides and back
Eye-socket for lanyard designed to provide perfect balancing

Controls

Left and right assignable slider switches
Two assignable rotary knobs
Six assignable three-position switches
One assignable momentary two-position switch
One assignable two-position switch
Wide top switch spacing
Adjustable stick tension
Dual ball bearing gimbals
Four vibration warning types
Home/Exit; User Menu/Servo Monitor buttons
Audio earphone jack for telemetry alarms
User stick calibration
Trainer system

Computer

Servo speed adjust
Five programmable mixes
V-tail, Ailvator, winglet, motor mixing
Trim mix
Logic switch (condition switch only)
Internal programmer for S.Bus servos
Servo monitor (neutral and moving tests)
Integral timer with two count up/countdown timers
Quick model select function

Airplane Features

Flap setting menu
Differential ailerons
Five-point throttle and pitch curves
Idle down
Supports:
  • Seven different wing types
  • Three different tail types
  • Two different rudder types
Supported Mixing:
  • Aileron to camber flap mixing
  • Aileron to brake flap mixing
  • Aileron to rudder mixing
  • Rudder to aileron mixing
  • Rudder to elevator mixing
  • Camber mixing
  • Elevator to camber mixing
  • Camber flap to elevator mixing
  • Snap roll mixing
  • Airbrake mixing
  • V-Tail mixing
  • Ailvator
  • Winglet
  • Motor mixing
  • Fuel mixture mixing
  • Gyro mixing

Helicopter Features

Six swash plate types
Five-point throttle and pitch curves
High/low pitch settings
Throttle hold
Swash AFR
Swash settings: mixing rate, linkage compensation, and speed compensation
Electronic swash ring
Throttle cut
Supported Mixing:
  • Swash mix
  • Throttle mix
  • Pitch to rudder mixing
  • Fuel mixture mixing
  • Gyro mixing with Flybarless support
  • Governor mixing (700 to 3500 rpm)

Glider Features

Flap setting menu
Differential ailerons
Supports:
  • 11 different wing types
  • Three different tail types
  • Two different rudder types
Supported Mixing:
  • Aileron to camber flap mixing
  • Aileron to brake flap mixing
  • Aileron to rudder mixing
  • Rudder to aileron mixing
  • Rudder to elevator mixing
  • Camber mixing
  • Elevator to camber mixing
  • Camber flap to elevator mixing
  • Butterfly mixing
  • Butterfly to elevator mixing
Transmitter
Modulation FASSTest, FASST, S-FHSS
Band 2.4 GHz
Number of Channels Proportional: 12
Switched: 2
Computer
Computer Radio Yes
Model Memory 30
Naming User Naming: 10-character
Model Naming: 10-character
Programming Airplane, helicopter, glider
Modes Modes 2
Expansion Storage SD/SDHC memory cards from 32 MB to 32 GB
Display
Type Back-lit LCD
Size 1.8 x 3" / 4.4 x 7.6 cm
Resolution 128 x 64
General
Battery Type 6V 1800 mAh NiMH battery pack
Dimensions Not specified by manufacturer
Weight Not specified by manufacturer
Receiver
Modulation FASSTest 2.4 GHz system, S.Bus system
Antenna Dual antenna diversity
Power Requirements 3.7 to 7.4 VDC battery or regulated output from ESC or other aircraft-based source

Note: When using ESC's, make sure that the regulated output capacity meets your usage application
Dimensions 1 x 1.7 x 0.6" / 24.9 x 47.3 x 14.3 mm
Weight 0.4 oz
Packaging Info
Package Weight 4.2 lb
Box Dimensions (LxWxH) 11.0 x 10.0 x 5.0"
Futaba 14SGH 14-Channel 2.4 GHz Computer Radio System
  • R7008SP Receiver
  • HT5F1800B NiMH Battery
  • Battery Charger
  • Switch Harness
  • Neck Strap

Reviews Futaba 14SGH 14-Channel 2.4 GHz Computer Radio System for DJI Spreading Wings S900 and S1000+ Drone

Login to leave review.
Login to get access to Q&A