Elinchrom BRX 250 Monolight (20440.1)
Elinchrom BRX 250 Monolight (20440.1)

Elinchrom BRX 250 Monolight (20440.1)

elinchrom

SSK # ELC-BRX250-20440.1

SOLD
Discontinued
Ship to:
No Warranty
RM2,272.00

Shopping Point 11.360 = RM11.36

Key Features

  • 250W/s Monolight
  • Multi-voltage: 90-260VAC
  • Built-in 8 Channel Skyport Receiver
  • Recycling: 0.27 - 1.02 Sec. @ 115V
  • Short Flash Duration: 1/ 2,762 Sec.
  • Flash Variation Range: 5.0 Stops
  • Proportionate Modeling Lamp
  • Optional Computer Control
  • Optional iPhone/iPad/iPod Touch Control
  • Pre-flash Detector System

The Elinchrom BRX 250 Monolight is packed with professional and convenience features you'd expect from a company of Elinchrom's caliber. Forget about tripping over PC cords. Although this head accepts one, it also has a built-in EL-Skyport Receiver with 8 frequency channels that can handle 4 distinct groups of flashes. The optional transmitter not only allows you to trigger your flash at distances up to 393' but gives you control of power, on/off, modeling light functions and Speed Sync activation. Free software for Mac and PC computers is available with the transmitter, adding additional features such as Flash-Delay for strobing effects. Add an optional USB Wi-Fi module for computer control. You can even use specially designed apps that allow full remote control via your for iPhone, iPad or iPod Touch.

The BRX 250 offers very fast recycling rates of 0.27- 1.02 seconds @ 115V with action-stopping flash durations as short as 1/2,762 sec. The auto-sensing, multi-voltage BRX 250 recognizes any AC power source from 90-260VAC, allowing you to use it anywhere in the world. Note: The head ships with a 115V modeling lamp. Swap it out with a 230V bulb for use in a nominal 230V environment.

For complete specs on select items included in this kit please see below:

1.Modeling Lamp

100W, 90V frosted, incandescent modeling light bulb for Elinchrom EL250, EL250C monolights, or any other lighting fixture that accepts an E27 medium screw base incandescent bulb.

2. Flash Tube

This Elinchrom Flashtube (250/500 W/S) for BXRi and Quadra A Flash Heads is a user-replaceable, UV twin-electrode flashtube which a unique super short flash duration (as short as 1/6000 sec.) when used with the Ranger Quadra A head.

  • Plug-in A Flashtube, user replaceable
  • UV coated
  • Compatible with Ranger Quadra A-Head and BXRi 250/500

3. Sync Cord

The Elinchrom PC to 3.5 mm Sync Cord (16'/5.0 m) works with their Universal Remote Control. It is compatible with Style, Style S, Style RX, FX, BX, BXRi and D-Lite flash heads. It's also compatible with Chic 1 and 2, Digital 1 and 2, and Digital RX 1200 and 2400 power packs as well as the Ranger Quadra battery pack.


4. Protective Cap

This is a protective cap for protection of the protective glass dome on an Elinchrom flash head. Use it for storage and transport of the flash head.

 
The Facts
  • Built-in EL-Skyport receiver for triggering
  • 8 Frequency channels with 4 groups
  • EL-Skyport Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
  • Pre-flash detector system to enable the use of BRX with speedlights
  • Visual Flash Confirmation option. The modeling lamp comes on to confirm the flash has been triggered
  • Proportional, maximum, minimum and independent adjustment of the modeling lamp
  • Variable f-stop steps: 1/1, 5/10, 4/10, 3/10, 2/10 or 1/10 steps are available
  • Programmable ready beep function
  • Power Auto-dump
  • Automatic temperature controlled ventilation
  • Action flashtube for sharper images
  • Multi-voltage auto-detection: 90-260VAC (excluding modeling lamp)
  • 5V sync socket for maximum protection of digital cameras
  • High impact resistant body shell
  • Accessory bayonet allowing the complete range of light modifiers
  • Rubberized handgrip with built-in fuse storage
  • Enhancements
  • Take full control of your units settings with the EL-Skyport App for iPhone, iPad and iPod Touch via the optional Wi-Fi module
  • Additional features such as Flash-Delay for strobing effects are available with the EL-Skyport Software
  • Firmware update option
  • Improved electronics for better performance
  • Maximum Watt/Seconds 500
    Guide Number f/64 @ 3.3' (1.0 m) @ ISO 100, with 48° reflector
    Recycle Time 115V: 0.27 sec @ full power, 1.02 sec @ min power
    230V: 0.29 sec @ full power, 0.73 sec @ min power
    Flash Duration Full power @ t0.5: 1/2,762 sec.
    1/2 Power @ t0.5: 1/2,165 sec.
    Color Temperature 5,360K
    Flash Variability 5.0 f/stops: 1/16 - 1/1 (16 - 250W/s)
    User Replaceable Flashtube Yes
    Changeable Reflector Yes
    Modeling Light Wattage 100W
    Voltage Stabilization Yes, +/- 0.5%
    Flash Ready Indicator Ready light, Switchable audible beep, dimming while recycling
    Operating Voltage 90-260VAC, 50/60Hz
    Sync Voltage 5.0VDC
    Triggering Sync cord (3.5 mm), optical slave, built-in Skyport receiver
    Receiver range: up to 393' (120 m) outdoors, 131' (40 m) indoors
    Circuit Protection Fuse
    Fan Cooled Yes
    Auto Dump Yes
    Dimensions 10.24 x 7.5 x 5.5" (26 x 19 x 14 cm)
    Weight 4.0 lb (1.85 kg)
    Elinchrom BRX 250 Monolight
  • Flashtube (250/500 W/S) for BXRi and Quadra A Flash Heads
  • Modeling Lamp - 100 watts/90 volts - for EL250, EL250C
  • Power Cord
  • PC to 3.5 mm Sync Cord (16'/5.0 m)
  • Protective Cap for Glass Dome, for Elinchrom
  • Reviews Elinchrom BRX 250 Monolight (20440.1)

    Login to leave review.
    Login to get access to Q&A

    SOLD
    Elinchrom BRX 250 Monolight (20440.1)
    Discontinued
    Elinchrom BRX 250 Monolight (20440.1)
    0

    RM2,272.00