The Elinchrom D-Lite RX One/One Softbox To Go Kit is a quality core or starter kit for portraits or products at home or on location. The kit includes 2 D-Lite RX One 100Ws Flash Heads with built-in wireless EL-Skyport receivers, 90-260 VAC multi-voltage capability and a 0.5 to 2.1-second recycling time. A 16-channel EL-Skyport Transmitter Plus is included for wireless triggering up to 656'. Portalite 26x26" and 22" Octa softboxes are also included to soften the light's output. The kit is rounded out by 2 light stands, a 16' sync cable, and a tube case for the lights.
The Elinchrom D-Lite RX One Flash Head is a 100W/s auto-sensing, multi-voltage monolight that recognizes any AC power source from 90-260VAC, allowing power variability over 5.0 stops in 1/10 stop increments. Recycling is a fast 0.5-2.1 sec. (@115V) with flash durations as short as an action-stopping 1/1,100 sec at full power.
The D-Lite RX One is packed with professional and convenience features usually found in flash heads twice its price. Although this head accepts one, you won't need a PC cord. It has a built-in EL Skyport Receiver with 8 frequency channels that can handle 4 distinct groups of flashes. Separate purchase of the EL Skyport Speed Transmitter not only allows you to trigger your flash at distances up to 393' but gives you control of power on/off, modeling light functions and Speed Sync activation. Free software for Mac and PC computers is available, providing additional features such as Flash-Delay for strobing effects. Add an optional WiFi module to the transmitter and you can use specially designed apps that allow full remote control from your for iPhone, iPad or iPod Touch.
D-Lite RX One's bayonet mount accepts all Elinchrom accessories and softboxes up to 53" (135 cm). It comes with a power cord with a U.S. plug, sync cord, flash tube and protective cap. The included 115V 100W modeling lamp must be swapped out when using the unit in nominal 230V electrical environments.
This Elinchrom Portalite Softbox (26 x 26") is usually sold as part of a D-Lite 4 or D-Lite 2 Monolight Kit. It has a flush-front diffuser that measures 26 x 26" (66 x 66 cm).
Dramatically soften the light from your Elinchrom Ranger Quadra flash head with this 22" Portalite Octa Softbox. This octagonal-shaped softbox will produce round catchlights while producing a broad, wraparound light for your subject. It comes with the speedring for compatibility with Ranger Quadra heads. Additionally, it's compatible with the optional deflector system to allow you to use the Portalite as a beauty dish with or without the front diffuser.
The EL-Skyport Transmitter Plus from Elinchrom is the latest evolution of EL-Skyport wireless radio triggers. Sixteen channels are available: 8 in Normal and 8 in Speed mode, with 4 discrete groups for different or sequentially triggered lighting setups at distances up to 656'. Channels 1, 3, and 7 are compatible with all enabled EL-Skyport units while channels 1, 3, 7, 9, 12, 15, 18, and 20 are only compatible with the ELC Pro HD flash head and the ELB 400 battery pack system. A 2.5mm sync socket extends the transmitter's versatility to cameras without hot shoes or for hard-wired flash units. The EL-Skyport Transmitter Plus runs on easily sourced AA batteries.
The Elinchrom PC to 3.5 mm Sync Cord (16'/5.0 m) works with their Universal Remote Control. It is compatible with Style, Style S, Style RX, FX, BX, BXRi and D-Lite flash heads. It's also compatible with Chic 1 and 2, Digital 1 and 2, and Digital RX 1200 and 2400 power packs as well as the Ranger Quadra battery pack.
Maximum Watt/Seconds | 100 |
Flash Variability | 5.0 Stops in 1/10th stop increments |
Recycle Time | @ 230V: 0.44 - 1.5 sec @ 115V: 0.45 - 2.1 sec |
Flash Duration | 1/1,100 - 1/2,200 Sec. min./max. @ t0.5 |
Voltage Stabilization | 0.5% |
Auto Dump | Yes |
Power Requirements | Multi voltage, 90-260VAC |
Modeling Light Wattage | 100W Control: Proportional, Low, Full, On/Off |
User Replaceable Flashtube | Yes |
Umbrella Mount | Centered tub, for EL-umbrellas 7.0 mm diameter Extra fitting on bracket for larger sized shafts |
Flash Sync | Up to 1/320 sec. |
Sync Voltage | 5.0V Compatibility with digital cameras |
Power Consumption | 230VAC, 50Hz: No flash / recycling 140W / 310 115VAC, 60Hz: No flash / recycling 190W / 280VA |
Triggering | Synch cord (3.5 mm), optical slave Integrated Receiver, 4 groups, 8 frequencies Receiver range: 164' (50 m) indoors, 393' (120 m) outdoors |
Changeable Reflector | Yes |
Flash Ready Indicator | Audible, visual |
Fan Cooled | Yes |
Dimensions | 7.0 x 7.5 x 5.5" (18 x 19 x 14 cm) |
Weight | 1.98 lb (0.9 kg) |
Packaging Info | |
---|---|
Box Dimensions (LxWxH) | 11.1 x 8.4 x 7.2" |
Size | 26 x 26" (66 x 66 cm) |
Shape | Square |
Compatibility | All Prolinca and Elinchrom flash units since 1974 For Quadra heads with separately purchased adapter |
Removable Front Face | No |
Removable Interior Baffle | No |
Accepts Grids | No |
Requires Speed Ring | Included for Elinchrom |
Packaging Info | |
---|---|
Box Dimensions (LxWxH) | 19.8 x 6.7 x 2.8" |
Frequency | 2.4 GHz |
Channels | 16 (8 in Normal mode, 8 in Speed mode) |
Groups | 1, 2, 3, 4 |
Maximum Flash Synchronization Speed | Normal: Limited to the native X-sync of your camera Speed: For digital medium-format cameras |
Indoor Range | 656' (200 m) for triggering |
Connectors | Foot for camera hotshoe 2.5 mm sync socket |
Power Source | 2x AA Batteries |
Indicators and Controls | Display Group and frequency channel Buttons On Top: Group selection, synchronization mode, channel selection,power down, power up, and test On Side: On/Off |
Compatibility | Channels 1, 3, and 7 are compatible with all enabled EL-Skyport units Channels 1, 3, 7, 9, 12, 15, 18, and 20 are only compatible with ELC Pro HD and ELB 400 |
AF Illuminator | No |
Dimensions | 3.7 x 2.0 x 1.5" (94.9 x 49.9 x 38.3 mm ) |
Weight | 0.14 lb (68 g) without batteries |
Packaging Info | |
---|---|
Box Dimensions (LxWxH) | 4.5 x 3.6 x 2.1" |
Reviews Elinchrom D-Lite RX One/One Softbox To Go Kit (Studio Lighting Set) (20847.2)