Edelkrone SliderPLUS Small (13.2
Edelkrone SliderPLUS Small (13.2")

Edelkrone SliderPLUS Small (13.2")


SSK # EKN-80750

1 Year Edelkrone Warranty

Shopping Point 16.750 = RM16.75

Key Features

  • Tracking System for Increased Range
  • 15.7" Sliding Range When Tripod Mounted
  • 7.9" Sliding Range on Flat Surfaces
  • 17.6 lb Load Capacity
  • Compact at Only 13.2" Long
  • 3/8"-16 Mounting Hole
  • 1/4"-20 and 3/8"-16 Tie-Down Screws
  • CNC Machined Aluminum Construction
  • Steel Ball Bearings

The SliderPLUS Small from edelkrone is a slider that uses a unique tracking mechanism that allows the rails of the slider to move with the camera when mounted on a tripod. This gives the slider 15.7" of sliding range in a unit that is only 13.2" long. Its compact sizes makes it ideal for travel, as it takes of up less room in your camera bag than other sliders with a similar sliding range. The slider supports loads up to 17.6 pounds.

The tracking system works by having two thin bands that are connected to each side of the mounting plate and base plate. When placed on a flat surface, the base plate travels in the opposite direction of the mounting plate. This will yield results of traditional slider. To take advantage of the design, the SliderPLUS needs to be mounted to a tripod. When mounted on a tripod, the movement of the base plate is restricted, causing the rails to move through the base plate in the same direction as the mounting plate.

With traditional sliders, you're often limited to the amount of dolly in/out you can do, because the slider itself usually will end up in the shot eventually. With the SliderPLUS, the rails are also retracting backwards with the camera, allowing for longer dolly in/out shots. A lock mechanism can be engaged to keep the slider from moving if the tripod becomes unlevel.

The slider provides a 3/8"-16 threaded hole at the bottom of the base plate for attaching to tripods, and comes with interchangeable 1/4"-20 and 3/8"-16 screws for mounting a camera or flat base tripod head to the mounting plate.
  • CNC machined aluminum construction
  • Steel ball bearings
  • 1/4"-20 and 3/8"-16 threaded screws
  • 3/8"-16 threaded mounting hole
  • Adjustable feet for use on ground or flat surfaces
Materials Temperature treated aluminum rods
Steel ball bearings
CNC machined aluminum parts
Mechanism Type Non-friction ball bearing
Tracking system
Capacity 17.6 lb (8.0 kg)
Mounting Interface 3/8"
Sliding Range On Ground: 7.9" (20.0 cm)
On Tripod: 15.7" (40.0 cm)
Suggested Tripod Leg Distance 70 cm or more between the points that the tripod legs contact the ground
Dimensions (HxWxD) 2.5 x 3.6 x 13.2" (6.4 x 9.2 x 33.6 cm)
Weight 3.3 lb (1.5 kg)
Packaging Info
Package Weight 5.2 lb
Box Dimensions (LxWxH) 18.0 x 7.4 x 3.7"
Edelkrone SliderPLUS Small (13.2")

Reviews Edelkrone SliderPLUS Small (13.2")

Login to leave review.
Login to get access to Q&A
Edelkrone SliderPLUS Small (13.2")
Edelkrone SliderPLUS Small (13.2")

RM3,350.00 RM4,500.00