Edelkrone SliderPLUS Large (21.1
Edelkrone SliderPLUS Large (21.1")

Edelkrone SliderPLUS Large (21.1")


SSK # EKN-80774

Estimated 3-14 Days Delivery
1 Year Edelkrone Warranty

Shopping Point 21.000 = RM21.00

Key Features

  • Tracking System for Increased Range
  • 31.5" Sliding Range When Tripod Mounted
  • 15.7" Sliding Range on Flat Surfaces
  • 8.8 lb Load Capacity
  • Compact at Only 21.1" Long
  • 3/8"-16 Mounting Hole
  • 1/4"-20 and 3/8"-16 Tie-Down Screws
  • CNC Machined Aluminum Construction
  • Steel Ball Bearings

The SliderPLUS Large from edelkrone is a slider that uses a unique tracking mechanism that allows the rails of the slider to move with the camera when mounted on a tripod. This gives the slider 31.5" of sliding range in a unit that is only 21.1" long. Its compact sizes makes it ideal for travel, as it takes of up less room in your camera bag than other sliders with a similar sliding range. The slider supports loads up to 8.8 pounds.

The tracking system works by having two thin bands that are connected to each side of the mounting plate and base plate. When placed on a flat surface, the base plate travels in the opposite direction of the mounting plate. This will yield results of traditional slider. To take advantage of the design, the SliderPLUS needs to be mounted to a tripod. When mounted on a tripod, the movement of the base plate is restricted, causing the rails to move through the base plate in the same direction as the mounting plate.

With traditional sliders, you're often limited to the amount of dolly in/out you can do, because the slider itself usually will end up in the shot eventually. With the SliderPLUS, the rails are also retracting backwards with the camera, allowing for longer dolly in/out shots. A lock mechanism can be engaged to keep the slider from moving if the tripod becomes unlevel.

The slider provides a 3/8"-16 threaded hole at the bottom of the base plate for attaching to tripods, and comes with interchangeable 1/4"-20 and 3/8"-16 screws for mounting a camera or flat base tripod head to the mounting plate.
  • CNC machined aluminum construction
  • Steel ball bearings
  • 1/4"-20 and 3/8"-16 threaded screws
  • 3/8"-16 threaded mounting hole
  • Adjustable feet for use on ground or flat surfaces
Materials Temperature treated aluminum rods
Steel ball bearings
CNC machined aluminum parts
Mechanism Type Non-friction ball bearing
Tracking system
Capacity 8.8 lb (4.0 kg)
Mounting Interface 3/8"
Sliding Range On Ground: 15.7" (40.0 cm)
On Tripod: 31.5" (80.0 cm)
Suggested Tripod Leg Distance 110 cm or more between the points that the tripod legs contact the ground
Dimensions (HxWxD) 2.5 x 3.6 x 21.1" (6.4 x 9.2 x 53.6 cm)
Weight 4.2 lb (1.9 kg)
Packaging Info
Package Weight 6.55 lb
Box Dimensions (LxWxH) 25.0 x 7.5 x 4.0"
Edelkrone SliderPLUS Large (21.1")

Reviews Edelkrone SliderPLUS Large (21.1")

Login to leave review.
Login to get access to Q&A
Edelkrone SliderPLUS Large (21.1")
Estimated 3-14 Days Delivery
Edelkrone SliderPLUS Large (21.1")

RM4,200.00 RM4,315.00