Dynamic Perception Stage Zero 6' Motorozied Slider Ultimate Bundle
Dynamic Perception Stage Zero 6' Motorozied Slider Ultimate Bundle

Dynamic Perception Stage Zero 6' Motorozied Slider Ultimate Bundle

dynamic perception


Estimated 3-14 Days Delivery
No Warranty

Shopping Point 38.050 = RM38.05

Key Features

  • Up to 15 lb Payload in Any Orientation
  • Intuitive and Simple Interface
  • Motion Control Modes

The Stage Zero 6' Motorozied Slider Ultimate Bundle from Dynamic Perception comes with everything you need for a 6' stage zero dolly and all of the accessories. This package features a 6' Rail for Stage Zero Dolly, MX3 Motion Controller, Portable 2700mAh Battery Pack, two Multi-Function Switch Blocks, Ultra-Light Legs for Stage Zero, Stage Zero Hardware Set, and a Canon N3 Remote Control Cable for MX3.

The 6' #1030 aluminum rail for the Stage Zero Dolly is anodized in dark blue. Plastic inserts are already installed in the rail for attaching the Stage Zero end caps.

The MX3 is a small lightweight field time-lapse and motion controller. At 6 x 2 x 1" it’s sleek and fits comfortably in your hand, and comes with an extensive set of features for motion control projects.

The Multi-Function Switch Block provides a switch input for the MX3, or any other device which needs an external switch. More than just a switch with wires, this block is a CNC-machined and powder-coated 6061 aluminum housing with a sealed, high-strength switch and 2 sealed 2.5mm TRS jacks for connectivity and daisy-chaining. The entire block is then potted using high-strength resin for long life and reliability in even the harshest of conditions and abuse. Any number of blocks may be connected to a single input device through the use of the daisy-chained ports.

The Portable Power 2700mAh Lithium Ion Battery Pack provides enough juice to run your Stage Zero Dolly for about 10 hours, while being small/light enough to fit in your pocket

The Ultra-Light Legs for Stage Zero are small enough to fit in a cargo pocket, strong enough to hold your rig up, and lightweight. These ultra-light legs keep your Stage Zero stable and off the ground. 

The Stage Zero Hardware Set is suitable for hobbyists who want to experiment with their own motor controllers and already have the #1030 rail (6' maximum length due to belt length). The motor and drive train are pre-installed on the cart.

The Canon N3 Remote Control Cable made by Pixel can be easily hooked-up to the MX3 Motion Controller.

Intuitive and Simple Interface
Plug in information and the engine makes the right decisions for you
Five simple buttons control all features
Advanced Capabilities
The simplicity of the system does not prevent you from doing advanced operations, like tuning motors, tweaking camera settings down to the millisecond, and more
Complete Camera Integration
Exposure control
Bulb or camera-controlled
Post-exposure delays
Focus line control
Support for most major dSLRs from Canon, Nikon, Pentax, etc.
Motion Control Modes
Continuous motion
Smooth video-like motion from 0.12"/minute to 30.9"/minute
Shoot-Move-Shoot (Interleaved)
Extended run time (up to days between moves) from 0.01" to 30.9" travel between shots
Manual motor control
Any Orientation
Open-Source Electronics and Software let you re-mix, explore, experiment, and modify to your heart's desire
Power Input 12 VDC (2.1 x 5.5 mm barrel)
Power Consumption 0.25 to 2.5 A
Length Cart: 64.0" (162.5 cm)
Dimensions Cart: 10.0 x 7.0 x 4.0" (25.4 x 17.7 x 10.1 cm)
Rail: 72.0 x 3.0 x 1.0" (182.8 x 7.6 x 2.5 cm) Standard #1030 extrusion (track)
Payload Up to 15.0 lb (6.8 kg) payload in any orientation
20.0 lb (9.0 kg) if kept horizontal and top loaded
Weight 11.0 lb (4.9 kg)
Model 6' #1030 Rail
Dimensions: 1 x 3" (2.5 x 7.6 cm) with 1/4" T-Slots

Battery Charger
Power Output: 10.8 to 12 VDC, 2.5 mm jack
Charging: 110 to 240 VAC (With included charger)
Dimensions: 3.7 x 2.2 x 1.0" (9.3 x 5.5 x 2.5 cm)
Weight: 6.8 oz (192.7 g)

Multi-Function Switch Block
Switch Dimensions: 2.0 x 1.5 x 1.0" (50.8 x 38.1 x 25.4 mm)
Switch Weight: 2.5 oz (70.8 g)

Ultra-light Legs
Load Capacity: 70.0 lb (31.7 kg)
Max Height: 6.0" (15.2 cm)
Min Height: 1.2" (3.0 cm)
Net Weight: 10.5 oz (297.6 g)

Canon N3 Remote Control Cable
Supported Devices: Canon 10D, 20D,30D, 40D, 50D, 7D, 6D, 1D Mark II, 1Ds Mark II, 1D Mark III, 1Ds Mark III, 1D Mark IV, 5D, 5D Mark II & 5D Mark III
Dynamic Perception Stage Zero 6' Motorozied Slider Ultimate Bundle
  • 6' #1030 Rail
  • MX3 Motion Controller
  • Portable 2700mAh Battery Pack
  • Stage Zero Hardware
  • Canon N3 Remote Control Cable for MX3
  • Ultra-Light Legs for Stage Zero
  • 2 x Multi-Function Switch Block
  • Reviews Dynamic Perception Stage Zero 6' Motorozied Slider Ultimate Bundle

    Login to leave review.
    Login to get access to Q&A

    Dynamic Perception Stage Zero 6' Motorozied Slider Ultimate Bundle
    Estimated 3-14 Days Delivery
    Dynamic Perception Stage Zero 6' Motorozied Slider Ultimate Bundle