Store your DSLR or compact camera in the ready position, at your side with the black Endeavor Belt System from Cotton Carrier. Part of the Excursion Series, this belt system is suitable for most varieties of photographic pursuit, such as hiking, covering sporting events, and similar shooting scenarios that might be described as light to medium activity. Although capable of carrying longer and heavier lenses, the longest recommended lens is a 70-200mm f/2.8 zoom. For ease-of-use, the waist belt features a quick-release buckle and fits most waist sizes up to 55". The shoulder strap has a sliding D-ring, safety tether strap, which allows the camera to travel up and down its length. The tether also serves as a safety backup for the remote possibility of accidental camera and mount separation. The tether attaches to the included split ring installed on your camera's strap lug with a swiveling snap-hook.
Included with your Belt System is a built-in accessory pouch capable of holding a small lens. The camera hub screws into the base of your camera's tripod socket with the supplied Allen Key. The back of the hub has a 0.25" threaded opening for mounting a tripod or quick-release plate without having to remove the hub from your camera. The hub's rubber washer is compressed during installation to help prevent unwanted loosening. Cotton Carrier recommends the use of a minute amount of LocTite as an added precaution. Always inspect your camera hub and receptacle for debris or wear that might negatively affect its performance.
Belt with Attached Small Lens Pouch Camera Lug Split Ring Camera Hub & Allen Key Camera Slide Tether
Cotton Carrier Endeavor Belt System for DSLR & Compact Cameras (Black)