Dual Version Fits All Your Devices
Comica Vimo S is available in USB-C and Lightning versions. You can choose the correct version based on your phone's audio input connector. Broad compatibility with leading phones, tablets and PCs.No additional software or device drivers are required.
Special Integrated Design
Comica Vimo S wireless microphone designed with its magnetically attracted receiver and integrated design. It's not only a charging case but a carrying case. The microphone is made of ultra-lightweight materials and is finger-sized for easy portability. the USB digital output makes it easy to use. No power on or pairing is required. You can plug in and play.
48kHz/24bit, and Denoise Mode
The Comica Vimo-S wireless microphone system has a built-in DSP denoising chip for intelligent denoising. In addition, the one-touch denoising function helps you get clearer audio in complex radio environments, eliminate noise or mute with one touch, and finish shooting more easily. Support mono/stereo output
656FT Wireless Transmission Range
Comica Vimo S mini microphone can transmit audio consistently for nearly 656 feet (in an open space) with less than 20ms of latency, making recording over long distances worry-free.
Gain control and One-touch Mute
The stepless gain control on the receiver end allows you to adjust the volume more freely. Once you have an emergency to deal with while recording, you definitely need the one-touch mute function to avoid useless sounds.
Small but Powerful
The Comica Vimo S mini wireless microphone transmitter has a battery life of 5 hours and a rechargeable case of 15 hours. When the transmitter is on low battery, ensure that it is charged for more than 2 hours.
Charge while Monitoring
Comica Vimo S has a USB-C port on the receiver side to charge the phone while monitoring (via a 2-in-1 audio cable). You can use this 2-in-1 audio cable to charge and monitor the recordings at the same time.
|Frequency Response||80Hz ~ 20kHz|
|Battery||TX:Built-in Li-ion Battery 95mAh 3.8V
Charging Case:Built-in Li-ion Battery 800mAh 3.8V
|Charging Time||TX:2 Hours
Charging Case:2 Hours
|Standby Time||TX:5 Hours
Charging Case:2 times for two transmitters and one receiver charged simultaneously
|Net Weight||TX: 10g
Charging Case: 53g
Charging Case: 29x58.5x63mm
|Operating Temperature||0℃ ~ 50℃|
|Storage Temperature||-20℃ ~ 60℃|