BlackRapid YETI Slim Dual Camera Harness
The YETI Slim Dual Camera Harness from BlackRapid is a slightly lighter, thinner version of the YETI Dual Camera Harness but still enables you to carry two cameras simultaneously, each held in a single shoulder design and ready to be slid up to shooting position. The wide, non-slip foam pad minimizes the stress on your shoulders and back. The harness includes a cross-body stabilizer that holds the harness firmly against your body and a second stabilizer for wearing one of the straps under your right or left arm-depending on your preference.
One strap on the harness is 63" than the other one is 59". Each strap can support a camera with attached lens. You can detach both straps and only use one with the included under-arm BlackRapid BRAD (BlackRapid Arm Defense). This connection makes sure your camera stays in place while you're on the move. The BRAD attaches to the harness using 2 strap hooks and 2 quick-release buckles.
The YETI attaches to your camera's 1/4-20 tripod socket via the included two stainless steel FastenRs. The FastenRs couple to the ConnectR2s. The ConnectR2 is a high-strength steel coated unit that features a smooth swivel and positive lock providing a full range of movement to your camera. The YETI is compatible with optional BlackRapid MOD items.
|Material || Top: Polyester base with ballistic paneling |
Bottom: 0.4" (1 cm) thick foam pad with knitted mesh underneath rubber mesh gripper
|Attachment Method || 2 x ConnectR2 |
2 x FastenR
|Dimensions || Primary Strap Length: 63.0" (160.0 cm, with pad) |
Secondary Strap Length: 59.1" (150.0 cm, with pad)
Shoulder Pad: 16.1 x 13.3-3.9" (41.0 x 5.25-10.0 cm, LxW)
Webbing Width: 1.0" (2.5 cm)
Length of BRAD: 25.0" (63.5 cm)
Length of Cross-body Strap Stabilizer: 31.5" (80.0 cm)
Length of Under-arm Stabilizer: Not Specified by Manufacturer
|Weight || 10.7 oz (303.3 g) |
BlackRapidYETI Slim Dual Camera Harness BRAD 2 x Stabilizers 2 x ConnectR2 2 x FastenR
Login to get access to Q&A