BlackRapid YETI Dual Camera Harness
The YETI Dual Camera Harness from BlackRapid enables you to carry two cameras simultaneously, each held in a single shoulder design and ready to be slid up to shooting position. The wide, non-slip foam pad minimizes the stress on your shoulders and back. The harness includes a cross-body stabilizer that holds the harness firmly against your body and a second stabilizer for wearing one of the straps under your right or left arm-depending on your preference.
One strap on the harness is 63" than the other one is 59". Each strap can support a camera with attached lens. You can detach both straps and only use one with the included underarm BlackRapid BRAD (BlackRapid Arm Defense). This connection makes sure your camera stays in place while you're on the move. The BRAD attaches to the harness using 2 strap hooks and 2 quick-release buckles.
The YETI screws to your camera's 1/4-20 tripod socket via the included two stainless steel FastenRs. The FastenRs couple to the ConnectR2s. The ConnectR2 is a high-strength steel coated unit that features a smooth swivel and positive lock providing a full range of movement to your camera. The YETI is compatible with optional BlackRapid MOD items.
|Material || Top: Polyester base with ballistic paneling |
Bottom: 0.4" (1 cm) thick foam pad and breathable Poly Mesh underneath rubber mesh gripper
|Attachment Method || 2 x ConnectR2 |
2 x FastenR
|Dimensions || Primary Strap Length: 63.0" (160.0 cm, with pad) |
Secondary Strap Length: 59.1" (150.0 cm, with pad)
Shoulder Pad: 16.9 x 2.6-4.3" (43.0 x 6.5-11 cm, LW)
Webbing Width: 1.0" (2.5 cm)
Length of BRAD: 25.0" (63.5 cm)
Length of Cross-body Strap Stabilizer: 31.5" (80.0 cm)
Length of Under-arm Stabilizer: Not Specified by Manufacturer
|Weight || 11.2 oz (317.5 g) |
BlackRapidYETI Dual Camera Harness BRAD 2 x Stabilizing Straps 2 x ConnectR2 2 x FastenR
Login to get access to Q&A