Beta Shell 4.300 Rigid Waterproof Lens Case
The Beta Shell 4.0-300mm Rigid Waterproof Lens Case (Black) is compatible with lenses with an external length from 9.84-11.61" (250-295mm) and maximum external diameter of 3.43" (87mm) or less. The case has a rigid cylindrical design that protects the lens against the harshest environments. A 1.5" Visco-elastic polyurethane foam support system dampens impact. It has a 2.0mm thick neoprene liner. There is a heavy-duty O-ring seal that keeps water, moisture, and dirt out. The case protects the lens from temperature changes that can develop condensation and fog.
The case is made from 6.5mm extruded ABS polymer shell lid. The shell and base are made from CNC machined ABS and PVC polymers. It has a high gloss finish that is scratch-resistant. It is individually sealed and tested against water penetration.
This case is assembled and finished by hand in the U.S.A.
- Case Basics
- Fits SLR lenses up to external length of 9.84-11.61" (250-295mm) and maximum external diameter of 3.43" (87mm) or less
- lenses with an external length up to 11.61"
- Assembled and finished by hand in the U.S.A.
- Rigid cylindrical design protect lens against the harshest environments
- 1.5" Visco-elastic polyurethane foam support system dampens impacts
- Memory-foam spacer disk for adjusting the fit of various lenses
- Two millimeter thick neoprene liner
- Heavy-duty O-ring seal keeps water, moisture, and dirt out
- Protects lens from temperature changes that can develop condensation and fog
- Highly durable and impact resistant
- Lightweight and strong
- Elastic strap aids grip or can be stored away when not in use
- 6.5mm extruded ABS and PVC polymer CNC machined shell, lid and base
- High gloss finish is scratch-resistant
- Individually sealed and tested against water penetration
- Product Highlights
- Arrows indicate rotational direction for opening and closing the shell lid
- Leverage nubs help user gain leverage for freeing a stuck lid
- Stainless steel screws are used for durability and strength
- Fits Lenses from 9.84-11.61"
- ABS and PVC Polymer Exterior
- Foam Support System
- 2.0mm Thick Neoprene Liner
- Elastic Strap Aids Grip
- Made in the USA
|Material || Exterior: 6.5mm extruded ABS polymer shell lid |
Exterior: CNC ABS polymer lid and base
Interior: 1.5" Visco-elastic polyurethane foam
Interior: 2.0mm thick neoprene liner
|Type of Closure || Lid screws on |
|Interior Dimensions || 9.84-11.61 x 3.43" (250-295 x 87mm) (L x Dia) |
|Carrying/Transport Options || Elastic strap |
|Weight || 1.57 lbs (710g)|
- Beta Shell 4.300 Rigid Waterproof Lens Case
- Beta Shell User Manual
- Memory-foam Spacer Disk
- Indicating Silica Gel Pack
- Official Beta Shell Decal
- Bomb-Proof Lifetime Guarantee Card
Login to get access to Q&A