The Behringer XENYX Q1202USB is a 12-input, 2-bus mixer that features four XENYX microphone preamps, "one-knob" mono compressors and 3-band EQs. The XENYX Q1202USB also features a built-in USB/audio interface. This mixer can handle a live gig as well as serve as your audio interface for recording.
The high-headroom XENYX mic preamps offer 130dB of dynamic range with a bandwidth that extends from 10Hz to 200kHz. The "one-knob" compressors come standard on all four mono channels. Additionally, the mono channels also have 3-band EQ with a low band at 80Hz, mid at 2.5kHz, high at 12kHz, as well as a low-cut filter.
The built-in stereo USB audio interface allows you to directly connect your Mac or PC. Any signal source connected to the mixer can be recorded straight to your hard drive. Additionally, with purchase, Behringer's website provides free downloads of Audacity, Podifier, Juice, Podnova and Golden Ear. All of this software collectively includes more than 100 virtual instruments and 50 FX plug-ins; turning your computer into a complete home-based or mobile recording studio.
XENYX Q1202USB Additional Features
Main mix outputs
Control room outputs
2-Track inputs
2-Track outputs
Headphone output
FX to control room out function
6' USB cable included
| Total # Of Inputs | 12 |
| Channels | 4 mono 4 stereo |
| USB Audio | Type B connector 2 channels in / 2 channels out 48 kHz sample rate |
| Busses | Stereo mix buss, mono FX buss |
| Type | XLR connector, balanced, discrete input circuit |
| Mic Preamps | 4 x XENYX preamp |
| Equivalent Input Noise | -134 dB / -136 dB A-weighted @ 0Ω source resistance -131 dB / -133 dB A-weighted @ 50Ω source resistance -129 dB / -131 dB A-weighted @ 150Ω source resistance |
| Frequency Response | < 10 Hz to 150 kHz (-1 dB) < 10 Hz to 200 kHz (-3 dB) |
| Gain Range | +10 to +60 dB |
| Maximum Input Level | +12 dBu @ +10 dB Gain |
| Impedance | 1.9kΩ |
| Signal-to-Noise Ratio | 110 dB A-weighted (0 dBu In @ +22 dB gain) |
| THD + N | 0.005% / 0.004% A-weighted |
| Phantom Power Supply | +48V |
| Type | 1/4" TRS connector, balanced |
| Impedance | 20kΩ, 10kΩ unbalanced |
| Gain Range | -10 to +40 dB |
| Maximum Input Level | +22 dBu @ 0 dB gain |
| Type | Dual 1/4" TRS connectors, balanced |
| Impedance | 20kΩ, 10kΩ unbalanced |
| Gain Range | -20 to +20 dB |
| Maximum Input Level | +22 dBu |
| Type | Dual RCA connectors |
| Input Impedance | 18kΩ |
| Maximum Input Level | +22 dBu |
| Output Impedance | 1kΩ |
| Maximum Output Level | +22 dBu |
| EQ Controls | 3-band EQ on mono channels: Low: ±15 dB @ 80 Hz Mid: ±15 dB @ 2.5 kHz High: ±15 dB @ 12 kHz |
| Aux Sends | 1/4" TRS connector, balanced Impedance: 120Ω Maximum output level: +22 dBu |
| Type | 1/4" TRS connector, balanced |
| Impedance | 120Ω balanced |
| Maximum Output Level | +22 dBu |
| Type | 1/4" TRS connector, balanced |
| Impedance | approx. 120Ω |
| Maximum Output Level | +22 dBu |
| Type | 1/4" TRS stereo connector, unbalanced |
| Maximum Output Level | +21 dBu / 150Ω (+25 dBm) |
| Compressor | Independent compressor on each mono channel |
| Metering | 4-LED per side |
| Faders | 1 x 60 mm master fader |
| Noise | Main mix @ -∞, channel fader @ -∞ -106 dB / -109 dB A-weighted Main mix @ 0 dB, channel fader @ -∞ -93 dB / -96 dB A-weighted Main mix @ 0 dB, channel fader @ 0 dB -84 dB / -87 dB A-weighted |
| Power Consumption | 20W |
| Dimensions (W x D x H) | 9.8 x 9.8 x 2.0" (250 x 248 x 50 mm) |
| Weight | 3.3 lb (1.5 kg) |
| Package Weight | 6.69 lb |
| Box Dimensions (LxWxH) | 16.1 x 12.15 x 4.45" |
Loading ...Shipping Rate & Duration
Lost / Damaged Parcel? We Guarantee Safe Arrival!
100% Under ShaShinKi Responsibilty! Full Refund or New Replacement!
RM289.00 RM378.00
RM1,450.00
Reviews Behringer XENYX Q1202USB 12-Input, 2-Bus Mixer with USB Output