Atomos Ninja Flame 7
Atomos Ninja Flame 7" 4K HDMI Recording Monitor

Atomos Ninja Flame 7" 4K HDMI Recording Monitor

atomos

SSK # ATOM-ATOMNJAFL2

Discontinued
6 Months ShaShinKi Warranty
RM3,890.00
RM4,043.00

Shopping Point 19.450 = RM19.45

Key Features

  • 1280 x 720 On-Camera Monitor & Recorder
  • 5" IPS/325 DPI Touchscreen Display
  • Waveform, Vectorscope, Focus Peaking
  • Records 1080p, 10-Bit, 4:2:2
  • ProRes or DNxHD Encoding and Playback
  • HDMI Input and Loop-Output
  • Records to 2.5" HDDs/SSDs
  • Cut and Tag Editing Tool

The Atomos Ninja Flame is a 7", 1920 x 1200 on-camera recording monitor combining 4K recording with a 10-bit FRC panel that supports native display of HDR (log) footage, as well as high-brightness viewing of Rec. 709 footage. It utilizes an HDMI input to support clean output signals at resolutions up to UHD 4K, recording it to 2.5" SSDs using 10-bit, 4:2:2 Apple ProRes and Avid DNxHR codecs.

The 10-bit panel and AtomHDR display technology support a brightness range of over 10 stops, allowing you to more accurately monitor your log gamma footage without having to view flat, washed-out looking images, or use a LUT to compress the dynamic range and color space. The monitor offers built-in pre-sets to accurately translate popular log formats from Sony, Canon, Panasonic, ARRI, RED, and JVC cameras. The settings only affect viewing, with recorded video remaining unaltered.

In addition to HDR monitoring, the monitor also offers a High Bright mode for traditional Rec. 709 monitoring. This mode takes advantage of the full 1500 cd/m² brightness to allow for more confident monitoring in bright outdoor environments, even without a sun hood. In HDR mode, use of an included snap-on sun hood is required, as displaying a wider brightness range reduces the overall brightness of the monitor.

Built to withstand the rigors of production, the Ninja Flame features built-in protective armor with silicone-covered corners and chamfered edges. Compared to the original Ninja, the Flame now features dual Sony L-Series battery plates that support battery hot-swapping, enabling longer run times. For audio recording, the monitor features a 3.5mm microphone input, with on-screen audio level display. Additionally, the monitor features a variety of on-screen exposure analysis, framing, and focus assist tools. Included with the basic kit are a Master Caddy II 2.5" drive enclosure and an AC adapter power supply. A travel case for storing the monitor is also included to protect it during storage and transport.

Monitor
  • 1920 x 1200 resolution
  • 10-bit FRC monitoring processing
  • 1500 cd/m² brightness
  • 4K HDMI input/output
  • AtomHDR technology displays 10 stops of dynamic range to natively display HDR (log) footage
  • Presets for viewing log gamma curves from Sony, Canon, Panasonic, ARRI, RED, and JVC cameras
  • High Bright mode for Rec. 709 viewing
  • UHD 4K downscale for HD monitoring
  • Supports custom 3D LUTs (.cube format)
  • Anamorphic de-squeeze: 2x, 1.5x, 1.33x, Panasonic 8:3
Recording
  • UHD 4K recording at 24/25/30 fps
  • 1080p recording up to 120 fps
  • 10-bit 4:2:2 ProRes and DNxHR recording to SSD/HDD media
  • Pre-roll record (HD 8 seconds, 4K 2 seconds)
  • Custom time-lapse mode
  • 10 metadata fields
Additional Features
  • 3.5mm microphone input
  • Audio level meters and mic level adjustment
  • Dual Sony L-Series type battery slots support hot-swappable for continuous power
  • Built-in armor with silicone-covered corners
Display
Type 7.1" (18 cm) IPS capacitive touchscreen
Resolution 1920 x 1200
325 ppi
Bit Depth 10-bit (8-bit plus FRC)
Video Aspect Ratio Native: 16:9
Brightness 1500 cd/m²
LUT Support 3D LUT (.cube file format)
Interface
Inputs 1 x HDMI (1.4b)
1 x 2.5 mm LANC
1 x 3.5 mm stereo mini-jack (Mic / Line)
Outputs 1 x HDMI (1.4b) loop-through output
1 x 3.5 mm headphone jack
Supported Video Format
Supported Signal Input: 10 / 8-bit 4:2:2 (dependent on video source)
Output: 10 / 8-bit 4:2:2 (dependent on video source)
Input/Output Resolutions 2160p 24/25/30
1080p 24/25/30/50/60/120
1080i 50/60
720p 50/60
Encoding Formats UHD 4K (3840 x 2160):
Apple ProRes HQ, 422, LT
DNxHR HQX, HQ, SQ, LB

1920 x 1080:
Apple ProRes HQ, 422, LT
DNxHD 220x, 220, 145, 36
Pulldown Conversion 24/25/30PsF to 24/25/30p (2:2 pulldown)
60i to 24p (3:2 pulldown)
Audio Input / Output
HDMI 2 or 8-channel, 24-bit (camera dependent)
Audio Input 3.5 mm (Mic / Line in), 2-channel, 48 kHz, 24-bit
Audio Output 3.5 mm headphone jack
Remote Operation
HDMI Auto HDMI trigger
Supported Protocols: Canon, Sony, Atomos Open Standard
LANC Supports slave configuration
Recording Media
Supported Media 4K:
2.5" SSD

HD High Frame Rate (50/60/120p):
2.5" SSD
2.5" HDD (7200 rpm and up) for 1080p 50/60

HD (30p and Less):
2.5" SSD
2.5" HDD (5400 rpm and up)

Note: Only use media that has been approved by Atomos
Master Caddy Dock Interface: 2.5" SATA to USB 2.0/3.0
Supported Applications Final Cut Pro X/7+
Avid Media Composer 5.0+
Adobe Premiere 5.5+
Grass Valley EDIUS 6.0+
Sony Vegas Pro 10+
Lightworks
Autodesk Smoke 2015
XML Support FCPX XML native, FCP7 supported with conversion (Adobe compatible)
General
Power Requirements 6.2 to 16.8 VDC (battery or DC power input)
Power Consumption 10 to 24 W
Supported Battery Types 2 x Sony L-Series type
Battery Life 5200 mAh: Up to 1.5 hours (monitor and record 4K)
7800 mAh: Up to 2.2 hours (monitor and record 4K)
Construction ABS polycarbonate
Dimensions 8.4 x 5 x 1.8" (21.4 x 12.7 x 4.5 cm)
Weight Without Batteries & Media: 1.4 lb (0.62 kg)
With Batteries & Media: 2.3 lb (1.06 kg)
Packaging Info
Package Weight 2.85 lb
Box Dimensions (LxWxH) 10.0 x 6.693 x 4.331"
Atomos Ninja Flame 7" 4K HDMI Recording Monitor
  • Travel Case for Ninja Video Recorder
  • Master Caddy II
  • AC Adapter
  • Reviews Atomos Ninja Flame 7" 4K HDMI Recording Monitor

    Login to leave review.
    Login to get access to Q&A

    SOLD
    Atomos Ninja Flame 7" 4K HDMI Recording Monitor
    Discontinued
    Atomos Ninja Flame 7" 4K HDMI Recording Monitor
    0

    RM3,890.00 RM4,043.00