Aputure Deity Microphones S-Mic 2 Moisture-Resistant Shotgun Microphone
Aputure Deity Microphones S-Mic 2 Moisture-Resistant Shotgun Microphone

Aputure Deity Microphones S-Mic 2 Moisture-Resistant Shotgun Microphone

aputure

SSK # AP-DESMIC2

Estimated 3-14 Days Delivery
1 Year Aputure Warranty
RM1,299.00
RM1,795.00

Shopping Point 6.495 = RM6.50

Key Features

  • For Indie Films, TV & Documentaries
  • Moisture-Resistant for Humid Conditions
  • Phantom Powered
  • Simple Operation with No Controls

With the Deity Microphones S-Mic 2 moisture-resistant shotgun microphone, boom operators and sound recordists can achieve broadcast-quality sound in a variety of outdoor shooting scenarios such as indie films, news gathering, documentaries, and weddings.

Professional-level features such as low-noise circuitry and anti-RF interference construction minimize the need for noise reduction after recording. Thanks to the high sensitivity of the S-Mic 2, robust output levels are possible without having to max out your preamp's gain control. Tonally, the S-Mic 2 offers a smooth, warm sonic signature with low off-axis coloration and natural attenuation of bass frequencies below 50 Hz.

You'll find no switches, buttons, or dials on the S-Mic 2, so you always depend on it to deliver consistent sound, reliability, and ease of use. The lightweight solid brass housing ensures toughness gig after gig, and its black speckle paint provides low reflectivity and added durability.

Ideal for Outdoor Use

The construction of the mic body is computer machined from solid brass inside and out, and no plastic is used anywhere in the construction to hold it together or mount the PCB. The S-Mic 2 uses a high-end capsule, computer-designed circuitry, and a gold-coated PCB (printed circuit board).

The PCB is also sprayed and coated with a clear epoxy, which allows the microphone to perform without issues even in the most humid environments. This coating also gives the microphone a water-resistance level that allows it to work in the rain without being damaged. The body of the microphone has been sprayed with a black speckle paint to give it an ultra-durable finish, so it looks professional in front of clients for years of ownership while being less reflective on set.

Broadcast-Quality Sound

The S-Mic 2 was engineered to give you broadcast-quality sound on a reasonable budget. Its 9.8" long body and supercardioid polar pattern yield focused directivity in front of the mic and 18 dB of off-axis rejection. It has a low noise floor of 12 dBA and an anti-RF interference build, allowing it to maintain less background noise even with significant gain boosts.

Phantom Powered

Featuring a balanced 3-pin XLR output and support for 24V or 48V phantom powering, the S-Mic 2 is ready for use with a variety of devices such as multitrack field recorders, handheld audio recorders, camera-mount mixer adapters, and XLR-equipped cinema cameras.

Ideal for Boompole Mounting

The S-Mic 2 includes a mic clip with a 3/8" thread for easy placement on a boompole and a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners.

For maximum reduction of noise from wind, vibration, and mic handling, the S-Mic 2 is available with a location kit, which includes a Rycote Lyre pistol grip shockmount and a faux fur windjammer.

Waterproof Hardshell Case

To better protect your microphone, the S-Mic 2 comes with a waterproof hardshell case. The case features a rubber O-ring in the lid that seals the case tight and an auto air-pressure balanced feature, ensuring your microphone is safe and ready to go.
Microphone
Form Factor Stand/Boom-Mount
Sound Field Mono
Operating Principle Line Gradient
Capsule Condenser
Polar Pattern Supercardioid
Orientation End Address
Circuitry Solid-State
Pad None
High-Pass Filter None
Tone Adjustment None
Indicators None
On-Board Controls None
Windscreen Foam (Included)
Performance
Frequency Range 50 Hz to 20 kHz
Maximum SPL 130 dB SPL
Off-Axis Rejection 3 dB at 60°
12 dB at 120°
>14 dB at 180°
 
Impedance 75 Ohms
Load Impedance 800 Ohms
Sensitivity 32 dBV/Pa at 1 kHz
Equivalent Noise Level 12 dB A-Weighted
24 dB CCIR
THD < 0.5%
Connectivity
Output Connectors 1 x XLR 3-Pin
Power
Operating Voltage 24 to 48 V
Operating Current Consumption 1.5 mA
Physical
Color Black
Mounting 3/8"-16 Female, Mic Clip (with Included Hardware)
Construction Material Brass
Operating Temperature 14 to 158°F / -10 to 70°C
Dimensions ø: 0.75 x L: 9.84" / ø: 19 x L: 249.94 mm
Weight 6.98 oz / 198 g
Packaging Info
Package Weight 3.465 lb
Box Dimensions (LxWxH) 15.05 x 8.45 x 3.7"

Deity Microphones S-Mic 2 Moisture-Resistant Shotgun Microphone

  • Mic Clip with Threaded 3/8" Female Mount
  • Foam Windscreen
  • Waterproof Hardshell Case

Reviews Aputure Deity Microphones S-Mic 2 Moisture-Resistant Shotgun Microphone

Login to leave review.
Login to get access to Q&A
Aputure Deity Microphones S-Mic 2 Moisture-Resistant Shotgun Microphone
Estimated 3-14 Days Delivery
Aputure Deity Microphones S-Mic 2 Moisture-Resistant Shotgun Microphone
0

RM1,299.00 RM1,795.00

Aputure Deity Condenser Shotgun Microphone Location Kit - Microphone & Accessories - ShaShinKi