Charger for 1-4 Micro AAA / Mignon AA / Baby C / Mono D and 1 x 9V E-Block
Charges all common batteries reliably and fast!
The Smart Charger PC V charges 1 - 4 NiMH or NiCd batteries of the sizes Micro AAA, Mignon AA, Baby C and Mono D as well as 1 9V E-Block
For round cells, a rapid capacity test is performed for about 5 seconds after inserting the batteries
LED display + single shaft monitoring
The charge state is displayed per charging slot via LED lights. The polarity reversal protection prevents incorrect insertion of the batteries. If 9V blocks are being charged, the charging time should be approximately calculated and then the device disconnected from the mains
Automatic shutdown (for round cells) In the case of round cells, the microcontroller-controlled charging with automatic switch-off ensures the best charging results. At the end of charging, the round cells can remain in the device. With a trickle charge, they are kept fresh and are ready for use at any time with 100% full charge
With the 9V block the charging time is easy to calculate. The 9V block can be removed from the device after an appropriate time.
What many globetrotters will enjoy:- Thanks to the wide-range input, the PC V can be used worldwide (using adapters) for 100 - 240 V.
The product features at a glance: Charging current:
Micro AAA | HR03: 400mA (1/2) | 200mA (3/4)
Mignon AA | HR6: 800mA (1/2) | 400mA (3/4)
Baby C | HR14: 800mA (1/2) | 400mA (3/4)
Mono D | HR20: 800mA (1/2) | 400mA (3/4)
9V block E | 6F22: 15mA (1)
Charging time reference (for 1000mAh AA): 1.5h (1-2) | 3h (3-4)
Input voltage: 100-240V AC
Can be used worldwide: Yes
Suitable for: AAA (1-4), AA (1-4), C (1-4), D (1-4), 9V Block (1)
Dimensions: 170 × 155 × 55 mm
Product weight: 440 grams
Scope of delivery: PC V, 1.8m power cable, user manual