Remote Controls - Page 7

• FSK 2.4GHz Wireless System with 100m range.
• TW-282 function is single, continuous, bulb, delay shooting modes; and also timer planning shooting mode.
• Delay shooting can be set the time and number of shoot; delay time is 1s to 59s; number of shoot is 1 to 99 pictures.
• Timer planning mode can be set the time between 0S to 99H59M59S.

• CR2 Battery

• FSK 2.4Ghz wireless remote control system - control distance 100M
• Viltrox has shipped more than 100000 sets of this timer since launch
• Automatic Timer: It can be set for : Delay time / Exposure time / Interval  time / number of shot
• Support manual Shutter: you can anytime press the shutter for photo shooting even the timer is set on
• Time can be set down to unit of second: From one second to 99 hours/ 59 minutes / 59 seconds
• Other added on features: Manual shutter / Auto Continuous focusing / Continuous shooting ( Speed-Priority)

• FSK 2.4GHz Wireless System with 100m range.
• TW-282 function is single, continuous, bulb, delay shooting modes; and also timer planning shooting mode.
• Delay shooting can be set the time and number of shoot; delay time is 1s to 59s; number of shoot is 1 to 99 pictures.
• Timer planning mode can be set the time between 0S to 99H59M59S.

• Remote Control Transmitter for Nikon
• Controls Any Camera with WR-R10 Receiver
• 3 Radio Frequencies Avoids Interference
• Line of Sight Range is 66'
• Avoid Camera Shake at Low Shutter Speeds

• Wireless Remote Control
• Works as Transmitter and Receiver
• Communication Range of 394' (120 m)
• 2.4 GHz Radio Frequency
• 15 Available Channels
• Group Camera Control
• Pairs with Up to 20 WR-1 Transceivers
• Synchronized Release; Interval Shooting
• Controls and Verifies Cameras Settings
• Compatible with Nikon WR-R10 and WR-T10

• For Use With Nikon D4 DSLR Camera
• Use iPhone/iPad to Operate Camera
• Double Image Transmission Speed
• Operate 10 D4 Cameras From One D4 Camera
• Range 590' (179.8 m)

• Compatible with FUJIFILM X-E1
• Frequency : 16 Possible Radio Channels over 433MHz
• Multi-function :Trigger your camera wirelessly or wired. Wired triggering even works if the receiver battery is dead or missing.
• Dual-Function Release : Press the transmitter's button half way to focus; press it fully to trigger the shutter.
• Delayed Release: The delay function gives you extra time to get into position.
• Long Exposures: With the JM-K you can control the length of the exposure remotely.
• LED Indicators : Two LED indicators confirm pre-focus and exposure when in the wireless mode.

• Image Transfer from Camera to Computer
• Fast Transfer and Upload to FTP Server
• Remote Camera Control from Computer
• Compatible with Nikon D4, D800/E, D7000
• Works with WT-5a for Wireless Transfer

• 16 possible channels
• Operate on Radio Frequency 433 MHz (RF)
• Operating range up to 30m(99’)
• Wireless continuous or single exposure
• Long time exposures
• Wireless auto focusing & triggering
• Transmitter can fire multiple receivers
• Replaces Canon RS-80N3/TC-80N3

JJJC IS-C1 Infrared Remote Control for Canon Cameras

• IS Remote x 1
• CR2032 Battery x 1
• Instruction manual x1
• Warranty card x1

• 16 Million Possible Channels
• For Canon and Panasonic Cameras
• Operates on Radio Frequencies (RF)
• Direct Line of Sight Not Required
• Operating Range up to 320' (100 m)
• Wireless Continuous or Single Exposures
• Long Time Exposures
• Transmitter Can Fire Multiple Receivers
• Wireless Autofocusing & Triggering