Battery & Charger - Page 5

• 190Wh Lithium-Ion V-Mount Battery
• Supports up to 11A Maximum Draw
• USB Type-A & 2.1mm Barrel Input/Output
• 14.8V D-Tap Output
• 5-LED Power Indicator
• Streamlined Design

• Super Capacity - 2800mAh AA rechargeable batteries
• Low self-discharge batteries will remain 90% juice when you leaving it for no use 1 year
• Embedded seal structure, ultra slim and make more inner space, DBCK steel shell can protect the battery against explosion due to overpressure.
• Ni-MH high quality cell, no memory effect, can be charged and used at anytime.

• Slim 14.8V, 98Wh Lithium-Ion Battery
• 1.5" Thin, 1.4 lb Weight
• Constant 12A Draw, 16A Peak
• RFID Battery Vitals Transmitter

• High operating voltage, stable during most of the application lifetime
• Some of the highest nominal capacities on the market today
• Excellent reliability over extended operating life
• Operating Temperature Range: -60°C/+85°C (-76°F/+185°F)
• Low self-discharge rate (less than 1% after 1 year of storage at + 20°C)
• Excellent resistance to humid environments
• Low magnetic signature
• Non-flammable (and non-pressurized at ambient temperature) inorganic (but corrosive) electrolyte
• Less than 1% capacity loss during storage at ambient temperature before use
• This battery is not rechargeable. Do not try to recharge.

• This is a standard V mount battery plate adapter, with automatic lock protection, specially designed for V mount battery mounting.
• Quad DC output: The power supply system can make the video camera battery output 4 selectable voltages (15V, 12V, 7.2V, 5V) for camera, video light, monitor, audio recorder, microphone, frequency divider, etc.
• With 15mm dual-hole rod clamp for mounting the battery plate on DSLR rig system.
• Equipped with NP-FW50 dummy battery adapter, can be used for Sony A7, A7S, A7R, A7II, A7SII, A7RII, A6300, A6400, A6500 ILDC cameras.
• Use the power supply system on your DSLR camera, can greatly prolong your shooting time. High conversion efficiency. Over-voltage protection circuit.

• For Select Sony Camcorders (FS7, Etc.)
• 35Wh Capacity
• Communication to Viewfinder
• 4-LED Gauge

• 98Wh Lithium-Ion V-Mount Battery
• Supports up to 12A Continuous Draw
• D-Tap and USB Accessory Outputs
• 4-LED Power Gauge
• Compact Form-Factor
• Two Bay V-Mount Battery Charger
• 4-Pin XLR DC Power Output
• Charge/DC-Out/Off Mode Switch
• Built-In Charging Capacity Manager
• Integrated Carry Handle for Portability

• Model number: BR2/3A-AB/3.0V
• TYPE: 1756-BA2
• Cell type: Lithium
• Voltage: 3v
• Capacity:1200mah
• Rechargeable: NO
• Dimensions (cm): 7.0 x 6.0 x 3.0

•     Engineered for long-lasting performance
•     Provides reliable, long-lasting power for your digital cameras, portable lights, electronics and more

HD 66 Li-ion Battery (3.7V, 1950mAh/ 7.2Wh, Charging Voltage 4.2V)

• Input: 100～240VAC 47～63Hz
•  CH1+CH2 Charging Output: 16.8V/2A
•  CH3+CH4 Charging Output: 16.8V/2A
•  Power: 80W
•  Indicator: L1 for CH1 and CH2, L2 for CH3 and CH4
•  FX-NANO4S applied for Fxlion NANO V-lock batteries.
•  Tiny size, portable to carry
•  L1/L2 charge one battery separately, fast charging current 2A; Charge two batteries,charging current 1A.

• Input Voltage: AC 100-240v, 12v DC 50-60Hz
• Output Voltage: DC 4.2v or 8.4v 0.6A
• Slim, Compact & Portable Design
• Complete with in Car Charger
• Automatic End-of-charge Cut off
• LED Indicator, Turns Green When Fully Charged
• Short-Circuit Protection

• This is a standard V mount battery plate adapter, with automatic lock protection, specially designed for V mount battery mounting.
• Quad DC output: The power supply system can make the video camera battery output 4 selectable voltages (15V, 12V, 7.2V, 5V) for camera, video light, monitor, audio recorder, microphone, frequency divider, etc.
• With 15mm dual-hole rod clamp for mounting the battery plate on DSLR rig system.
• Equipped with NP-FZ100 dummy battery adapter, can be used for digital cameras, such as Sony A7III, A9, A7RIII, A7RIV digital cameras.
• Use the power supply system on your DSLR camera, can greatly prolong your shooting time.

• 2-Bay Smart Charger
• Charges Nine Different Battery Types
• Handles Li-Ion, NiMH & NiCd Batteries
• Displays Battery Type, Voltage & Status
• Over-Current & Over-Voltage Protection
• Short-Circuit & Reverse-Polarity Defense
• AC or DC Charging Option
• Control Button to Power On or Off Screen
• Control Button Cycles through Display

 Andoer Andoer D-Tap B Type Socket D-tap Male to 8 Port D-tap Female Spliter Power Cable Connector with USB Interface 8V/12V DC Jack Replacement for ARRI RED Cameras V-Mount Battery Monitors

• Optional AC Adapter
• Requires EP-5B Power Connector
• Provides Power to Select Nikon Cameras

• For Select Sony Camcorders (FS7, Etc.)
• 97Wh Capacity
• Communication to Viewfinder
• 4-LED Gauge

• 2 x Hypercore NEO Slim 98Wh Batteries
• 1.5" Thin, 1.4 lb Weight
• RFID Battery Info Transmitter
• X2A 2-Bay Vertical Battery Charger

• For DJI Osmo Pocket 3
• Built-In 950mAh Battery
• Increases Operating Time by 62%
• 1/4"-20 Mounting Thread
• Supports Hot Swapping
• Weighs Only 2.2 oz
• USB-C Port for External Audio Devices