WD 6TB Red 5400 rpm SATA III 3.5
WD 6TB Red 5400 rpm SATA III 3.5" Internal NAS HDD

WD 6TB Red 5400 rpm SATA III 3.5" Internal NAS HDD

western digital

SSK # WD-60EFRX

Pre-order, Estimated 3-14 Days from Supplier
1 Year Western Digital Warranty
RM1,750.00

Shopping Point 8.750 = RM8.75

Key Features

  • 6TB Storage Capacity
  • 3.5" Form Factor
  • SATA III 6 Gb/s Interface
  • 64MB Cache
  • 5400 rpm
  • Up to 175 MB/s Sustained Transfer Rate
  • 600,000 Load/Unload Cycles
  • 1,000,000 Hours MTBF
  • Error Recovery Controls
  • NASware 3.0 Technology

Designed with home and small office/business customers in mind, the 6TB Red 5400 rpm SATA III 3.5" Internal NAS HDD from WD is well-suited for NAS environments with up to eight 3.5" drive bays. Engineered to handle increased workloads, this 6TB drive operates using a SATA III 6 Gb/s interface, a 64MB cache, and a rotational speed of 5400 rpm, all of which help to ensure uninterrupted data transfers with a sustained rate of up to 175 MB/s. This drive also features high levels of reliability, with 600,000 load/unload cycles, <10 in 1014 non-recoverable read errors per bits read, error recovery controls, and 1,000,000 hours MTBF for 1-8 bay NAS systems. Also built into this drive are noise and vibration protection and WD's NASware 3.0 helps increase system compatibility, allowing WD Red drives to be more easily integrated with your existing network infrastructure.

General Features

Fill Your NAS with WD Red
Built for 1 to 8-bay NAS systems, WD Red lets users store their data in one unit
NASware 3.0 Technology
Built into every WD Red hard drive, NASware 3.0's technology helps improves your system's storage performance by increasing compatibility, integration, upgradeability, and reliability
Built for NAS Compatibility
Desktop drives aren't purpose-built for NAS, but WD Red drives with NASware are. WD's technology helps takes the guesswork out of selecting a drive. WD Red is for small NAS systems and WD's algorithm balances performance and reliability in NAS and RAID environments
Desktop Drives vs. WD Red
Desktop hard drives are not designed for NAS environments. Do right by your NAS and choose a drive with an array of features to help preserve your data and maintain optimum performance. Take the following into consideration when choosing a hard drive for your NAS:
  • Compatibility: Without being tested for compatibility with your NAS system, improved performance is not guaranteed
  • Reliability: The always-on environment of a NAS or RAID is a hot one and desktop drives aren't typically tested in those conditions. WD Red is
  • Error Recovery Controls: WD Red NAS hard drives are specifically designed with RAID error recovery control to help reduce failures within the NAS system. Desktop drives are not typically designed for RAID environments where this can be an issue
  • Noise and Vibration Protection: Designed to operate solo, desktop drives offer little or no protection from the noise and vibration faced in a multi-drive system. WD Red drives are designed for multi-bay NAS systems
  • WD Red for Home
    Stream, backup, share, and organize your digital content at home with a NAS and WD Red drives designed to share content to the devices in your home. Red NASware helps increase your drives' compatibility with your devices, TV, stereo, and more
    WD Red for Small Business
    WD Red is a good hard drive choice for 1 to 8 bay systems. NASware 3.0 allows for integration with your existing network so WD Red can share and backup files at the speed of your business. For larger businesses with up to 16 bays, use WD Red Pro
    3D Active Balance Plus
    This helps ensure your data is protected from excessive vibration and noise in a NAS or RAID environment. This dual-plane balance control helps reduce the degradation of your drive over time
    Reliability
    Since your NAS system is always on, a reliable drive is essential. With an MTBF of up to 1 million hours, the WD Red drive with NASware 3.0 is designed for 24x7 environments
    Cooler Operations
    By reducing power consumption, the operating temperature of your NAS stays cooler. With a lower temperature in your system, you can create a more reliable solution for your NAS
    Product Specifications
    Capacity 6 TB
    Interface SATA III 6 Gb/s
    Form Factor 3.5"
    Advanced Format (AF) Yes
    Native Command Queuing Yes
    RoHS Compliant Yes
    Performance
    Data Transfer Rate (max) Interface Speed: 6 Gb/s
    Internal Transfer Rate: 175 MB/s
    Cache 64 MB
    Rotational Speed 5400 rpm
    Reliability / Data Integrity
    Load/Unload Cycles 600,000
    Non-Recoverable Read Errors per Bits Read <1 in 1014
    MTBF 1,000,000 hours
    Workload Rate Limit 180 TB per year
    Power Management
    12 VDC ±10% (Peak) 1.75 A
    Average Power Requirements Read/Write: 5.3 W
    Idle: 3.4 W
    Standby/Sleep: 0.4 W
    Environmental Specifications
    Temperature Operating: 32 to 149°F / 0 to 65°C
    Non-Operating: -40 to 158°F / -40 to 70°C
    Shock Operating (2 ms, read/write): 30 Gs
    Operating (2 ms, read): 65 Gs
    Non-Operating (2 ms): 250 Gs
    Acoustics Idle: 25 dBA
    Seek (average): 28 dBA
    Physical Dimensions
    Dimensions 1.028 x 5.787 x 4.000" / 26.11 x 147.0 x 101.6 mm
    Weight 1.65 lb / 0.75 kg
    Packaging Info
    Package Weight 1.9 lb
    Box Dimensions (LxWxH) 9.0 x 6.1 x 2.8"
    WD 6TB Red 5400 rpm SATA III 3.5" Internal NAS HDD

    Reviews WD 6TB Red 5400 rpm SATA III 3.5" Internal NAS HDD

    Login to leave review.
    Login to get access to Q&A

    WD 6TB Red 5400 rpm SATA III 3.5" Internal NAS HDD
    Estimated 3-14 Days from Supplier
    WD 6TB Red 5400 rpm SATA III 3.5" Internal NAS HDD
    0

    RM1,750.00