DR KOH

just sharing…photography, IT, computer, ocean engineering, life…

Connecting Sekonic L-308 Lightmeter to Nikon SB-800 Flash

This is how the connection between the two.

kkk_4093.JPG

Sekonic L-308 Lightmeter is able to measure flash light exposure, and give you the correct setting. A great lightmeter. The LCD has blue backlight, very beautiful!

kkk_4094.JPG

Connection is made using PC Sync male to male cable.

kkk_4096.JPG

When the Sekonic is pressed, the LCD backlight of the flash is lighted up as well. Take note that flash setting should be in Auto mode.

kkk_4097.JPG

Press the button on the right of the Sekonic and it will fire the flash and measure the exposure. It will then tell you the aperture needed for the flash.

kkk_4099.JPG

Press the button once and both LCD will light up.

kkk_4102.JPG

Press again and you can see the flash is being fired.

kkk_4145.JPG
Both Sekonic and SB-800 flash are working fine connected using Nikon PC Sync Male to Male cable.

Nikon SC-11 Flash Sync Cord - PC Male to PC Male with Nikon Screw Locks
Nikon SC-11 Flash Sync Cord – PC Male to PC Male with Nikon Screw LocksRM68.00Buy Now

Hits: 7

You may have missed