DJI Zenmuse H4-3D Gimbal for GoPro HERO4 Black (NOT suitable for GoPro HERO3, HERO3+, or HERO4 Silver) (Official DJI Malaysia Warranty)
DJI Zenmuse H4-3D Gimbal for GoPro HERO4 Black (NOT suitable for GoPro HERO3, HERO3+, or HERO4 Silver) (Official DJI Malaysia Warranty)

DJI Zenmuse H4-3D Gimbal for GoPro HERO4 Black (NOT suitable for GoPro HERO3, HERO3+, or HERO4 Silver) (Official DJI Malaysia Warranty)

dji

SSK # DJI-ZMH43D

Discontinued
1 Year DJI Malaysia Warranty
RM1,489.00

Shopping Point 7.445 = RM7.45

Key Features

  • Keeps Aerial Shots Level and Stabilized
  • 3-Axis Brushless Gimbal
  • Tilt Range of -130° to +45°
  • Independent IMU Provides Motion Data
  • Plug-and-Play with Phantom 2
  • Optional GCU for Other Aircraft
  • Updatable Firmware
  • Weighs 0.8 Ounces
  • Power From Flight Battery
  • Specifically Balanced for HERO4 Black (H4-3D is specifically balanced for the GoPro HERO4 Black -- it will not work with the HERO3, HERO3+, or HERO4 Silver )

One of the biggest obstacles to capturing polished video from a multi-rotor RC aircraft is camera shake. Wind turbulence buffets the aircraft, and even on a still day there is always rotor-incurred vibration to contend with. If you are recording with the GoPro HERO4 Black and using a multi-rotor with a DJI flight controller installed, the Zenmuse H4-3D Gimbal is the solution. This 3-axis, brushless motor gimbal corrects for pitch and roll, and allows for tilting of -130° to +45°. It can power from the flight battery, and for Phantom 2 installations uses the aircraft's integrated GCU. An optional GCU is available separately for other models. The H4-3D is compatible with the A2, WooKong-M, Naza‐M, Naza‐M V2, and Phantom 2 flight control systems.

Pre-Calibrated
The H4-3D arrives pre-calibrated for the GoPro HERO4 Black camera - once installed, no additional configuration steps are required

Note: The H4-3D is specifically balanced for the GoPro HERO4 Black -- it will not work with the HERO3, HERO3+, or HERO4 Silver
Aircraft Compatibility
The H4-3D works out-of-the-box with the Phantom 2 as the Phantom 2 features a built-in gimbal control unit (GCU). In addition, it can be used with many other aircraft when combined with an independent GCU module (available separately). The gimbal can be used with multi-rotors that have the following flight control systems:
  • A2
  • WooKong-M
  • NAZA-M
  • NAZA-M V2

Note: The NAZA‐M LITE is not supported. Additionally, the NAZA‐M V2 PMU must be used if using a NAZA‐M V1 flight controller
Independent IMU
The inertial measurement unit (IMU) is essential for the gimbal to be able to stabilize the camera. It senses motion, using this data to instruct the servo motors which direction to move. For maximum precision, this data gets updated every millisecond
Firmware Updatable
As software updates get released, DJI will make them available to end users in the form of free firmware updates. Simply connect the H4-3D to a computer running the assistant software
Optional GCU Module
For use in aircraft that - unlike the Phantom 2 - do not have integrated GCUs, an optional GCU (gimbal control unit) is available separately
Performance
Angular Vibration Range Pitch/Roll: ±0.02°
Yaw: ±0.03°
Maximum Rotation Speed Tilt Axis: ±130°/s
Controlled Rotation Range Tilt Axis Control: ‐130° to +45°
Electrical and Mechanical
Working Current Static Current: 400 mA (at 12 V)
Dynamic Current: 600 mA (at 12 V)
Power Requirements 3S to 6S (12 V to 26 V)
General
Camera Compatibility GoPro HERO4 Black only
Supported Flight Control Systems A2
WooKong-M
NAZA-M
NAZA-M V2

Note: The NAZA‐M LITE is not supported. Additionally, the NAZA‐M V2 PMU must be installed if using a NAZA‐M V1 flight controller
Operating Temperature 50 to 122°F / 10 to 50°C
Dimensions 4.1 x 3.6 x 3.1" / 103 x 92 x 80 mm
Weight Gimbal: 5.9 oz / 168 g
GCU: 0.8 oz / 22 g
DJI Zenmuse H4-3D Gimbal for GoPro HERO4 Black

Reviews DJI Zenmuse H4-3D Gimbal for GoPro HERO4 Black (NOT suitable for GoPro HERO3, HERO3+, or HERO4 Silver) (Official DJI Malaysia Warranty)

Login to leave review.
Login to get access to Q&A