The TM-2X Stereo XY Condenser DSLR Microphone from Tascam is designed to record stereo audio directly to your DSLR camera's microphone input. It can be mounted directly on your camera's hot shoe mount and is capable of being swiveled 180-degrees. The TM-2X has two switchable sensitivities, allowing it to work with a range of cameras. As it is powered by plug-in power from your camera, it requires no external batteries for operation.
A low-cut filter at 130Hz allows you to eliminate low-frequency rumble while the included noise isolation arm helps prevent the mic from picking up mechanical noise from your DSLR. For outdoor filming, a fur windscreen is included to help reduce wind noise. The TM-2X can handle SPL up to 120dB, allowing it to be used on a variety of sources.
Type | Condenser |
Polar Pattern | Cardioid |
Frequency Response | 50 Hz to 20 kHz |
Maximum Input Level | 120 dB SPL (@ 1 kHz with sensitivity set to H and low-cut filter set to FLAT) |
Output Impedance | 1.6 kΩ (RL = 2.2 kΩ, Vcc = 2.5 V ) |
Signal to Noise Ratio | 74 dB typical (RL = 2.2 kΩ, Vcc = 2.5 V ) |
Sensitivity | H Setting: −37 dB (1 kHz, 0 dB = 1 V/Pa), (RL = 2.2 kΩ, Vcc = 2.5 V ) L Setting: −52 dB (1 kHz, 0 dB = 1 V/Pa), (RL = 2.2 kΩ, Vcc = 2.5 V ) |
Low Cut Filters | 130 Hz (RL = 2.2 kΩ, Vcc = 2.5 V ) |
Cable Length | 13" (33 cm) |
Connector | 1/8" (3.5 mm) TRS stereo mini plug (Tip: left channel, Ring: right channel, Sleeve: ground) |
Power Requirement | Plug-in power (JEITA standard CP-1203A) |
Operating Temperature Range | 41 to 95°F (5 to 35°C) |
Dimensions (WxHxD) | 2.2 x 2.3 x 2.7" (57 x 59 x 69 mm), excluding cable and accessories) |
Weight | 2.6 oz (75.0 g) |
Packaging Info | |
---|---|
Package Weight | 0.6 lb |
Box Dimensions (LxWxH) | 8.5 x 6.2 x 2.3" |
Reviews Tascam TM-2X Stereo XY Condenser DSLR Microphone