Tascam US-1200 6-In/2-Out USB Audio Interface with DSP Mixer
Giving you access to 6 channels of recording at up to 24-bit/96 kHz resolution with an integrated DSP mixer, the US-1200 6-In/2-Out USB Audio Interface with DSP Mixer from Tascam features 4 of Tascam's HDDA XLR microphone preamps along with dual 1/4" line/instrument selectable inputs. The integrated DSP mixer gives you access to the interface's low latency mode, as well as its included DSP effects for monitoring. The mixer boasts 2 modes, one optimized for multi-track recording and the other geared towards live broadcast and video editing.
- Equipped with HDDA Microphone Preamplifiers
- The 4 XLR inputs are balanced microphone pre-amplifier circuits comprised of selected components optimizing sound quality. The US-1200 is designed to clearly translate expressive performances to a DAW
- 6 Analog inputs for Multi-Channel Recording
- The US-1200 is loaded with 4 XLR connectors supplying +48V phantom power and 2 TRS balanced inputs. The balanced low-noise connections can be used for line connection equipment, e.g. keyboards, drums, etc. In addition, INPUTs 5 & 6 also support high-impedance connection for instrument (guitar/bass) recording
- Low Latency Monitoring
- Utilize the DSP Mixer for low-latency monitoring. Control the monitor balance easily with the MON MIX knob
- Supports Recordings up to 24-bit/96 kHz
- With increasing HDD capacity and ever-faster PCs, high-resolution formats are being used more frequently. Record at 24-bit / 96 kHz resolution and guarantee your music reaches its highest potential
- DSP Mixer
- The built-in DSP mixer can be used for various purposes simply by switching modes:
- Multi-Track Mode
- Multi-track mode facilitates music production. The input sound and monitor mix can be adjusted separately, fine-tuning the balance between recording and playback volumes optimally. Monaural monitoring is also a possibility within the mixer operation
- Stereo-Mix Mode
- Stereo-mix mode can be used for internet streaming, live broadcasts or video editing. It is possible to deliver not only input sound but also sound from the PC back to the PC by mixing it inside the US-1200. Applications such as adding announcements while playing background music with the PC and then sending the accumulated track back to the PC
- On-Board DSP Effects
- The input effects can be selected from compressor or 3-band EQ. Input effects can use various recording. For example, while recording vocals you can boost your high-frequency range with the 3-band EQ. Also, the compressor effect is very convenient at recording especially for bass guitar, vocal and drums
Reverb is available for your send effects.
- Two TRS analog balanced outputs
- 50mW + 50mW headphone output
- EIA 1U rack mount size
| Sampling Frequency | 44.1, 48, 88.2, 96 kHz |
| Bit Rate | 16, 24-bit |
| Mic Input | Mic In 1 to 4: Connector: XLR-3-31 (1:ground, 2:hot, 3:cold), Balanced Input Impedance: 2.2 kΩ Rated Input Level, Gain Knob Max: -68 dBu (0.0003 Vrms) Rated Input Level, Gain Knob Min: -22 dBu (0.0616 Vrms) Maximum Input Level: -6 dBu (0.3884 Vrms) Headroom: 16 dB |
| Guitar Input | Guitar In 5 and 6, when Guitar/Line switch is set to Guitar Connector: 1/4" (6.3 mm) TS (T:hot, S:ground), Unbalanced Input Impedance: 800 kΩ Rated Input Level, Gain Knob Max: -51 dBV (0.0028 Vrms) Rated Input Level, Gain Knob Min: -6 dBV (1.995 Vrms) Maximum Input Level: +10 dBV (3.162 Vrms) Headroom: 16 dB |
| Line Input | Line In 5 and 6, when Guitar/Line In switch is set to Line In Connector: 1/4" (6.3 mm) TRS jack (T:hot, R:cold, S:ground), Balanced Input Impedance: 10 kΩ Rated Input Level, Gain Knob Max: -41 dBu (0.0069 Vrms) Rated Input Level, Gain Knob Min: +4 dBu (1.228 Vrms) Maximum Input Level: +20 dBu (7.75 Vrms) Headroom: 16 dB |
| Monitor Output | Monitor Output L/R Connector: 1/4" (6.3 mm) TRS jack (T:hot, R:cold, S:ground), Balanced Output Impedance: 100 Ω Nominal Output Level: +4 dBu (1.273 Vrms) Maximum Output Level: +24 dBu (12.283 Vrms) |
| Headphone Output | Connector: 1/4" (6.3 mm) stereo phone jack Maximum Output Level: 50 mW + 50 mW or higher (THD+N 1% or less, into 32 Ω load) |
| USB | Connector: USB B type, 4-pin Format: USB 2.0 High Speed (480 mbps) |
| Power | Dedicated AC adapter (GPE248-120200-Z) |
| Power Consumption | 5.5 W |
| Operating Temperature | 41 to 95°F (5 to 35°C) |
| Frequency Response | 20 Hz to 20 kHz, +/-1 dB (44.1/48 kHz, JEITA) 20 Hz to 40 kHz, +/-2 dB (88.2/96 kHz, JEITA) |
| THD | 0.01% or less (1 kHz sine wave, at maximum input, JEITA) |
| S/N Ratio | 95 dB or higher (gain knob at MIN, JEITA) |
| Crosstalk | 90 dB or more (1 kHz) |
| Windows Requirements | OS: Windows XP:32-bit SP3 or later Windows 7:32-bit, 64-bit Windows 8:32-bit, 64-bit Windows 8.1:32-bit, 64-bit Compatible Computers: Windows computers with a USB 2.0 port CPU: 2 GHz or faster dual core processor (x86) Memory: 2 GB or more Driver: ASIO 2.0, WDM (MME) |
| Mac Requirements | OS: 10.6 to 10.9 Compatible Computers: Apple Macs with a USB 2.0 port CPU: 2 GHz or faster dual core processor Memory: 2 GB or more Driver: Core Audio |
| Dimensions (WxHxD) | 19.0 x 1.8 x 11.8" (482.0 x 45.0 x 300.4 mm) |
| Weight | 6.4 lb (2.9 kg) |
| Packaging Info | |
|---|---|
| Package Weight | 9.0 lb |
| Box Dimensions (LxWxH) | 21.0 x 15.0 x 5.0" |
Tascam US-1200 6-In/2-Out USB Audio Interface with DSP Mixer
Loading ...Similar products
.jpg "Buy Ducame 200 Pieces Disposable Microphone Windscreen Cover (Black) (Microphone not Included)")
In Stock
Boya BY-M1 Omni-Directional Lavalier Microphone for Smartphones and DSLR Cameras
RM59.00 RM180.00
TOP
-44%
In Stock
Ducame SC7 3.5mm TRS to TRRS Patch Cable (Replacement for Rode) for Smartphone Mobile Phone Handphone
RM38.00 RM121.00
Your Recently Viewed Items
Estimated 3-14 Days from Supplier
Tascam US-1200 6-In/2-Out USB Audio Interface with DSP Mixer
RM850.00
Reviews Tascam US-1200 6-In/2-Out USB Audio Interface with DSP Mixer