The Rode Stereo VideoMic delivers true stereo X/Y recording in a compact, camera mountable microphone. The Stereo VideoMic accurately captures stereo ambiance while exhibiting excellent off-axis rejection and signal-to-noise ratio. The small, light weight profile allows quick and unobtrusive mounting on DV and HDV cameras without appearing in the frame.

The shock-mount is attached to the microphone and a versatile shoe mount allows the entire microphone to be mounted to a hot-shoe on a camcorder, boom pole or stand. Replaceable rubber O-rings suspend the microphone on the shock-mount and protect against noise due to movement and handling. A coiled cable terminates to a stereo TRS 1/8" (3.5mm) mini output connection. The Rode Stereo VideoMic is powered with a standard 9 Volt battery. The Stereo VideoMic is an excellent choice for weddings, Electronic News Gathering (ENG), interviews and more.

Specifications

Transducer	Condenser
Polar Pattern	Supercardioid
Frequency Response	40Hz - 20kHz Selectable HPF @ 80Hz / 12dB /octave
Dynamic Range (Typical)	115dB (per IEC651)
Signal-to-Noise Ratio	79dB (A-weighted per IEC651)
Maximum Input Sound Level	130dB (@ 1kHz. 1% THD into 1 ohm load)
Power Requirements	9 Volt DC Alkaline
Output Impedance	200 ohms
Output Connectors	Stereo mini jack - 1/8" (3.5mm) Right Channel - Ring
Pad	-10dB
Low Frequency Roll-Off	80Hz / 12dB octave
Dimensions	6.85 x 3.93 x 2.51" (172 x 100 x 64mm) (Length x Height x Diameter)
Weight	11.64 oz (330g)