Rode NTG4+ Complete Shotgun Microphone HDSLR Kit
This NTG4+ Shotgun Microphone HDSLR Kit provides a sound recording solution for film making and video applications. The kit consists of a Rode NTG4+ Shotgun Microphone with Digital Switches and Built-In Rechargeable Battery, a universal shockmount, a windshield for the microphone, a boompole with integrated XLR microphone cable, two angled XLR microphone cables, a low to high impedance matching transformer microphone cable, a neoprene boompole bag for transporting the boompole, and a universal microphone pistol grip. These components enable a wide variety of configurations including run and gun style filming with the microphone mounted on the camera or for use by a dedicated sound operator with either the boompole or handheld with the pistol grip.
This Kit Includes:
- Rode NTG4+ Shotgun Microphone with Digital Switches and Built-In Rechargeable Battery
- Auray DUSM-1 Universal Shock Mount for Camera Shoes and Boompoles
- Rode WS6 Deluxe Windshield for the NTG2, NTG1, NTG4, and NTG4+ Microphones
- K-Tek KE-89CC Avalon Series Aluminum Boompole with Internal Coiled XLR Cable
- Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable - 20' (6.1 m), Black
- Kopul LMT100 - Low to High Impedance Matching Transformer (1.5')
- Auray Neoprene Boompole Bag for 34" Closed Boompole with Shotgun Mic and Softie
- Auray Universal Microphone Pistol Grip
- Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable - 1.5' (0.45 m), Black
This Kit Includes:
- Rode NTG4+ Shotgun Microphone with Digital Switches and Built-In Rechargeable Battery
-
Acoustic Principle | Line gradient |
Directional Pattern | Super-cardioid |
Frequency Range | 20 to 20,000 Hz (selectable HPF at 75 Hz) |
Sensitivity | -32 dB re 1V/Pa (25 mV at 94 dB SPL) ± 2 dB at 1,000 Hz. |
Output Impedance | 200 ohm |
Equivalent Noise | 16 dBA SPL (per IEC651) |
Maximum Output | 7 dBu (at 1 kHz, 1% THD into 1 kOhm) |
Dynamic Range | 119 dB (per IEC651) |
Maximum SPL | 135 dB |
Signal to Noise Ratio | 78 dB SPL (per IEC651) |
Battery | 150 hours of phantom power on a 2-hour charge |
Output Connection | 3-pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground) |
Dimensions | 0.87 x 10.94" (22.00 x 278.00 mm) |
Weight | 6.21 oz (176.00 g) |
Package Weight | 1.35 lb |
Box Dimensions (LxWxH) | 13.2 x 5.2 x 2.7" |
- Rode WS6 Deluxe Windshield for the NTG2, NTG1, NTG4, and NTG4+ Microphones
-
Dimensions | Maximum Microphone Length: 6.25" (160.5mm) Maximum Microphone Diameter: 0.82 to 0.88" (21 to 22.5mm) |
Weight | 50g (1.76 oz) |
Package Weight | 0.25 lb |
Box Dimensions (LxWxH) | 11.7 x 5.6 x 3.2" |
- K-Tek KE-89CC Avalon Series Aluminum Boompole with Internal Coiled XLR Cable
-
Material | Aluminum |
Sections | 4 |
Length | 2' 5"-7' 2" (0.76-2.19m) |
Weight | 1.11 lbs (0.50kg) |
Load Capacity | Not Specified By Manufacturer |
Package Weight | 1.6 lb |
Box Dimensions (LxWxH) | 33.0 x 3.0 x 2.8" |
- Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable - 20' (6.1 m), Black
-
Cable Type | 3-Pin XLR balanced microphone cable |
Length | 20' (6.1 m) |
Shielding | 95% Dual-Spiral Shielding |
Gauge | 24 AWG |
Contacts | Silver |
Connector 1 | XLR Male |
Connector 2 | XLR Angled Female |
Package Weight | 0.9 lb |
Box Dimensions (LxWxH) | 7.0 x 3.2 x 2.6" |
- Kopul LMT100 - Low to High Impedance Matching Transformer (1.5')
-
Connectors | XLR to 1/8" (3.5 mm) |
Package Weight | 0.2 lb |
Box Dimensions (LxWxH) | 4.1 x 0.6 x 0.1" |
- Auray Neoprene Boompole Bag for 34" Closed Boompole with Shotgun Mic and Softie
-
Material | Neoprene |
Type of Closure | Zipper with protective lining |
Dimensions (LxWxD) | 39.0 x 6.0 x 2.0" (100.0 x 15.5 x 5.5 cm) |
Weight | 15 oz (454 g) |
Package Weight | 0.8 lb |
Box Dimensions (LxWxH) | 39.0 x 7.8 x 1.0" |
- Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable - 1.5' (0.45 m), Black
- Auray DUSM-1 Universal Shock Mount for Camera Shoes and Boompoles
- Auray Universal Microphone Pistol Grip
- Rode NTG4+ Shotgun Microphone
- Rode RM5 Stand Mount for the NT5 Microphone
- Foam Windscreen
- Padded Zip Pouch
- Micro-USB Charging Cable
- Auray DUSM-1 Universal Shock Mount for Camera Shoes and Boompoles
- Rode WS6 Deluxe Windshield for the NTG2, NTG1, NTG4, and NTG4+ Microphones
- K-Tek KE-89CC Avalon Series Aluminum Boompole with Internal XLR Cable
- Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable - 20' (6.1 m), Black
- Kopul LMT100 - Low to High Impedance Matching Transformer (1.5')
- Auray Neoprene Boompole Bag for 34" Closed Boompole with Shotgun Mic and Softie
- Auray Universal Microphone Pistol Grip
- Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable - 1.5' (0.45 m), Black
Loading ...
Login to get access to Q&A
Reviews Rode NTG4+ Complete Shotgun Microphone HDSLR Kit