PocketWizard PowerST4 Receiver for Elinchrom RX
Using the
PocketWizard PowerST4 Receiver for Elinchrom RX can give you near-total remote control over all your Elinchrom RX strobes--with either the MiniTT1 Transmitter or FlexTT5 Transceiver (both optional, use of one is required) on your camera and a PowerST4 plugged into your Elinchrom RX flash, you can now change flash power settings directly from your camera position. Use the PowerTracking function and when you change ISO or aperture, the lights automatically adjust their power setting.
By adding the optional AC3 ZoneController, you can control three different zones of lights in 1/3-stop increments with up to a six-stop range. HyperSync gives you the ability to sync at up to 1/8000s at full power (depending on your flash and camera). Total control (over your lights, anyway) is yours!
Important Information:
Units sold in USA use 344.0 MHz for channels 1-16, and 346.5-354.0 MHz for channels 17-32 • Units sold in Europe use 433.62 MHz for channels 1-16, and 434.22 for channels 17-32 • USA and Euro models cannot converse with each other • USA models may interfere with devices in Europe
Frequency | 340.00 - 354.00 US FCC/IC 433.42 - 434.42 MHz - CE |
Channels | 52 Channels over 26 Frequencies - US FCC/IC 35 Channels over 5 Frequencies - CE |
Antenna | 2.7" (6.9 cm) rubberized |
Mounting | Five-pin remote socket |
Status Indicator | LED: Green, Amber, Red Status indications |
USB | USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground |
Operating Temperature | Above 5°F (-15°C) and below 120°F (50°C) |
Storage Temperature | Without battery: Above 22°F (-30°C) and below 185°F (85°C) |
Power | Receives power from attached flash |
Dimensions | 3.6 x 2.2 x 1" (9.2 x 5.5 x 2.5 cm) |
Weight | 0.77 oz (21.83 g) |
Requirements | Requirements: Must be used in conjunction with a MiniTT1 or FlexTT5 on camera for power control capability. May be paired with any PocketWizard transmitter or transceiver for simple triggering. |
PocketWizard PowerST4 Receiver for Elinchrom RX
Quick Guide
Loading ...
Login to get access to Q&A
Reviews PocketWizard PowerST4 Receiver for Elinchrom RX