The Nissin Di866 Mark II Flash For Nikon DSLRs, with a Guide Number of 198 (ISO 100 in feet at 105mm), provides photographers with the power needed to light up a wide variety of shooting situations. It provides an easy-to-read, two-way color display which helps ensure intuitive operations. The Mark II has been upgraded from the previous model, with a re-designed zoom head that has a new transmission motor that significantly reduces the operating noise to a volume level of 70dB or less, a new metal foot for the hot-shoe mount, and a flash tube with increased heat tolerance. The fill-in subflash power ratio range has been increased, now offering a range from 1/1 to 1/128, and the high performance wireless sensors now cover the distance of 82' (25 meters).
The Mark II also has auto-rotation so it stays upright even when turned for vertical framing. It features the "MY TTL" mode for adjustable default level, and a manual motor zoom of 24-105mm. It is designed with clip-on capabilities, built-in wide-angle diffuser and catch-light reflector for added versatility. It's powered by four (4) LR6 rechargeable batteries, (Lithium, NiMH or Oxiride--not included), and when it is operated with a Nissin Power Pack Pro 300 (not included), users have 300 full-power flashes. It boasts a recycling time of 0.1-5.5 seconds. Compatible with i-TTL/i-TTL-BL.
The Di866 Mark II is a high-powered flash unit, great for serious photographers who will appreciate its features.
- Wireless TTL
- Adjustable TTL default level
- Auto rotation view color display
- High Speed Synchronization (HSS)
- External auto-exposure sensor
- Multi AF assist light
- Eight F-stops, from F2 to F22 with compensation capability
- Fill-in sub-flash
- External auto-exposure sensor
- Multiple focus points are supported
- Sub-flash fill-in while the main flash turns for bounce lighting
- High voltage power pack yields recycle time less than 1 sec
- MY TTL level setting
- Battery Magazine quick loading system
- Built-in Wide Angle Diffuser
- Built-in Catch-light Reflector
- Quick battery loading with original battery magazine
- Eight F-stops, from F2 to F22 with compensation capability
- FP flash function synchronizes to all high shutter speed over 1/250sec
- 315V high voltage power series connector
- Firmware update service via USB port
- Additional Features:
Energy Saving : Auto power off, Off, 10/15/30/45/60 mins, Stand-by mode 30 sec, display off Display screen switch off
Auto Aperture Flash F1.4-F16 (ISO100), 1/3 Ev steps, [Advanced] Manual zoom, Sub-flash allowed
Manual Power Full-1/128, 1/3Ev steps, [Advanced] Manual zoom, Sub-flash allowed
Multi-flash Frequency-90Hz, 1-90 times, Power 1/8-1/128
Wireless Remote flash Slave:
Slave Digital Slave / Film Slave, [Advanced] Sub-Flash Allowed
Wireless TTL Master / Remote, 4 Channels, 3 Groups (A, B, C)[RMT, RMT2 for Sony]
Modes: Off/ TTL/ Manual, TTL Flash Ratio Adjustable
Ev Compensation on flash : -0.3 to +3.0, 1/3Ev steps
My TTL setting : -0.3 - +3.0, 1/3Ev steps
Sub-flash: Manual Full to 1/128, 1Ev steps
FE/FV Lock: [AE-L] OR [AF-L]
Rear curtain sync, high speed sync, red eye reduction mode, red eye reduction mode + slow sync
AF assist light distance: 2.29-32.8' (0.7-10m)
USB firmware update terminal, X terminal
Repair Service
